Description
| Manufacturer |
OTC |
| Brand |
OTC |
| Model |
7483 |
| Item Weight |
1.7 pounds |
| Product Dimensions |
4.5 x 4.75 x 2.25 inches |
| Item model number |
7483A |
| Manufacturer Part Number |
7483A |
OTC’s 7483A Water Pump Puller Remover/Installer helps remove and install water pump pulleys faster and easier on specific Ford, Lincoln and Mercury 3.0L DOHC V6 engines. Kit includes: forcing screw with shaft protector and cross block puller, pulley removal plate, 2 hex head cap screws w/washers, and a forcing screw equipped with a special nut for installing. Fits: Ford Escape 2001–2012, Ford Fusion 2006–2012, Ford Taurus 2001–2005, Lincoln MKZ 2007–2012, Mercury Mariner/Milan 2006–2011, Mercury Sable 2001–2005. Rugged, all metal construction ensures this versatile tool set will deliver reliable long-term service. Similar to Rotunda 303-S455. Value is at the core of the OTC tool and equipment portfolio. For a simple repair or the most complex drivability concern, these award-winning tools universally solve problems faster, and at better value, than any other product line available. Whether it’s a specialty tool or unique piece of service equipment, OTC provides top solutions to modern automotive service challenges while increasing technicians’ productivity and shop profits.
Imported customer feedback
What customers reported
4.6 / 5
122 ratings
Source: Amazon. These reviews were imported from the source marketplace and are not reviews of purchases made on this website.
Vehicle information
Available fitment details
Listing compatibility notes
- Fits: Ford Escape 2001–2012, Ford Fusion 2006–2012, Ford Taurus 2001–2005, Lincoln MKZ 2007–2012, Mercury Mariner/Milan 2006–2011, Mercury Sable 2001–2005.
- Whether it’s a specialty tool or unique piece of service equipment, OTC provides top solutions to modern automotive service challenges while increasing technicians’ productivity and shop profits.
Fitment data is provided as a buying aid. Verify the listing against your vehicle and existing part before ordering.
Exact identity, part numbers, model references, and available compatibility evidence
Buying guidance
Quick decision
An identity-first puller sets listing organized around stable product references and available compatibility evidence.
Fit and size notes
- Match the complete identifier, side, position, connector, dimensions, and visible design with the existing part.
- Treat uncertain vehicle notes as a buying aid, not as a confirmed fitment guarantee.
Specification notes
- Canonical product: MP-US-B01A8Q4FWO
- Source product ID: B01A8Q4FWO
- Category: Tools & Equipment / Pullers / Puller Sets
- Available images: 1
Before you buy
- Match the complete identifier, side, position, connector, dimensions, and visible design with the existing part.
- Treat uncertain vehicle notes as a buying aid, not as a confirmed fitment guarantee.
David C. –
Imported from Amazon. This is not a review of a purchase made on this website.
External marketplace context: Verified Purchase
used this puller and installer today on a ford escape. Worked perfectly. Pulled the pulley off, changed the cam seal and them put the pulley back on. Quick and easy. Had to remove the battery and battery tray to get good access. then did the seal in minutes. Very happy to get this tool
Rick T –
Imported from Amazon. This is not a review of a purchase made on this website.
External marketplace context: Verified Purchase
I have a 2008 Mercury Milan and this tool came with everything to take off and put on the the water pump pulley (the pulley above the pump and turned by the cam).Took just over two hours to do the whole job and taking the pulley off and putting it back on was one of the easiest tasks to do with this tool.If I had a tool for releasing the clamps instead of channel locks it would have taken about half the time.With this tool, a new belt, a new gates pumps (full assembly not just the insides) I was under $200. Midas quoted me about $700.-Rick
AL –
Imported from Amazon. This is not a review of a purchase made on this website.
External marketplace context: Verified Purchase
This tool is high quality and works perfectly for removing and installing pulley. I used it on a 2008 Ford Escape 3.0 V6. I am pleased with its ability to make the job easier. I installed a Ford factory water pump, and new water pump belt. No damage to the pulley. I recommend this tool.
miguel f. –
Imported from Amazon. This is not a review of a purchase made on this website.
External marketplace context: Verified Purchase
This tool worked like it was supposed… I used it on a 2004 mazda 6 3.0 to change water pump and 2009 Mercury Milan… made the job easier and efficient A+++
Wade –
Imported from Amazon. This is not a review of a purchase made on this website.
External marketplace context: Verified Purchase
I used this tool on a 2005 ford escape with a 3.0 liter. Removed and replaced water pump pulley no problem!!
Kenneth Cheeks –
Imported from Amazon. This is not a review of a purchase made on this website.
External marketplace context: Verified Purchase
After watching a YouTube video on changing the water pump, he recommended this tool and it was perfect for the job.
Sanneti –
Imported from Amazon. This is not a review of a purchase made on this website.
External marketplace context: Verified Purchase
Used it once but it paid for itself, made it so easy to pull that pulley but I still think it’s too expensive. There’s more metal on a regular pulley puller. At the end it was worth it.
Mathew England –
Imported from Amazon. This is not a review of a purchase made on this website.
External marketplace context: Verified Purchase
Good quality and works great