Skip to content
Clear product details Fitment guidance Contact support
PartMatch Direct Match the identity before the order.

Lubegard 19001-UNV Kooler Kleen Transmission Cooler Flush with 2-in-1 Fitting, 13.25 oz.

437 ratingsSource: Amazon

Confirm quantity, package contents, selected variation, current offer details, and store terms before placing the order.

  • For use in all transmissions including automatic, CVT, DCT and manual transmissions
  • Removes grease, dirt, sludge and metal shavings
  • Prevents new or rebuilt transmissions from pollutants
  • Will not pollute new transmission fluid
  • Contains no CFCs or Chlorinated solvents

This product is currently out of stock and unavailable.

Before you order
  • Confirm the part number, position, dimensions, and connector details shown on this page.
  • Compare the listing with the part currently installed on your vehicle.
SKU: D-B098LYLJ2Q Category:

Description

Manufacturer ‎Lubegard
Brand ‎Lubegard
Model ‎19001-UNV
Item Weight ‎1.12 pounds
Product Dimensions ‎9.37 x 2.95 x 2.68 inches
Item model number ‎19001-UNV
Manufacturer Part Number ‎19001-UNV
OEM Part Number ‎Nissan 999MP-AM006P, Subaru SOA868V9255
Special Features ‎Contains no water, 2-in-1 fitting

LUBEGARD Kooler Kleen Trans Cooler Flush uses a proprietary mix of detergents to safely clean transmission cooler and cooler lines in automatic, CVT, DCT and manual transmissions. As recommended by OEMs, transmission fluid cooler lines MUST BE flushed to prevent pollutants such as friction materials and metal debris from entering newly installed transmissions. Kooler Kleen safely removes these pollutants from the transmission cooler and lines without use of water-based detergent that could be harmful to transmissions and seals.

Additional information

Style

Dual Tip, Single Tip

Imported customer feedback

What customers reported

4.6 / 5 437 ratings

Source: Amazon. These reviews were imported from the source marketplace and are not reviews of purchases made on this website.

8 reviews for Lubegard 19001-UNV Kooler Kleen Transmission Cooler Flush with 2-in-1 Fitting, 13.25 oz.

  1. H. Limmer

    Imported from Amazon. This is not a review of a purchase made on this website.

    External marketplace context: Style: Single Tip|Verified Purchase

    Disconnected cooler lines from transmission (GM 6L80 in fullsize pickup). First blew out all fluid with shop air. I used a length of clear, plastic tubing to go between the cooler line and my drain pan. The fluid came out the same darkened red color as what came out of the pan but nothing too dark nor at all thick, just “normal” fluid. I continued blowing shop air through the factory coolers (one in radiator and one in front of the radiator) and alternated from one line to the other a few times. Then I cut the little adapter off the end of the clear, plastic tube attached to the can of Kooler Kleen. The tube fit INSIDE the cooler line fairly tight. I started to send the Kooler Kleen into the line and thought not much was happening. I kept going and in a few seconds saw some darkish fluid coming out of the other line. Then it turned very, very dark and appeared very sludge-like for a few seconds. After this blast of dark sludge, the fluid coming out started to get more and more clear. I put maybe 2/3 of the can through one way and then reversed for the remaining 1/3. I finished by blowing shop air through the lines for at least 30 seconds in each direction and did this at least 3 times in each direction. I think the blast of very dark, sludge-like material that I saw coming out through the clear tubing is proof that this product did dislodge and flush out accumulated material. I feel confident in saying that all that sludge-like material can’t help the function of the cooler. I can’t say for certain that I improved cooling effectiveness but I feel better getting that junk out of the lines and coolers even if it makes no difference. I also like the idea of getting that much more brand new fluid into the transmission so that I’m that much closer to a 100% fluid change. Every little bit helps. I plan to use Kooler Kleen every time I change the transmission fluid in all my vehicles. It’s not hard to use and doesn’t cost much. Again, cleaner lines and coolers can’t hurt performance and just might improve it enough to keep the fluid a little cooler which only helps extend fluid and transmission life.

  2. metrork

    Imported from Amazon. This is not a review of a purchase made on this website.

    External marketplace context: Style: Single Tip|Verified Purchase

    Did a excellent job cleaning my mother board when I needed to change out a bios chip

  3. Steve

    Imported from Amazon. This is not a review of a purchase made on this website.

    External marketplace context: Style: Single Tip|Verified Purchase

    I used it to clean out the transmission lines and cooler for my transmission replacement. The product leaked from the connectors as I tried to flush it through. I was able to flush enough through and then used compressed air to blow it out.

  4. Michael Pence

    Imported from Amazon. This is not a review of a purchase made on this website.

    External marketplace context: Style: Single Tip|Verified Purchase

    Great product

  5. richard fifer

    Imported from Amazon. This is not a review of a purchase made on this website.

    External marketplace context: Style: Dual Tip|Verified Purchase

    Bought 3 cans thinking it would take a lot to flush cooler and lines. Only needed one can. It works. Cleans out all the old trans fluid.

  6. Plentiful Endeavors

    Imported from Amazon. This is not a review of a purchase made on this website.

    External marketplace context: Style: Dual Tip|Verified Purchase

    You can always trust that Lubegard will deliver you a product that performs, ive used this on coolers and lines hard and soft, I’ve also used the product on power steering and oil cooler I swear buy this product even know the pn by heart

  7. Jessica

    Imported from Amazon. This is not a review of a purchase made on this website.

    External marketplace context: Style: Dual Tip|Verified Purchase

    If your looking to clean transmission cooler lines reasonably priced then this is your product works as described and would recommend to use.

  8. Cecil U.

    Imported from Amazon. This is not a review of a purchase made on this website.

    External marketplace context: Style: Dual Tip|Verified Purchase

    We cleaned my transmission lines after rebuilding my transmission and product worked as I expected.

Add a review

Your email address will not be published. Required fields are marked *

Product facts

Specifications

Canonical product
MP-US-B098LYLJ2Q
Source product ID
B098LYLJ2Q
Category
Oils & Fluids / Flushes / Transmission
Available images
10
Style
Dual Tip, Single Tip

Vehicle information

Available fitment details

Listing compatibility notes

  • 68 inches Item model number ‎19001-UNV Manufacturer Part Number ‎19001-UNV OEM Part Number ‎Nissan 999MP-AM006P, Subaru SOA868V9255 Special Features ‎Contains no water, 2-in-1 fitting LUBEGARD Kooler Kleen Trans Cooler Flush uses a proprietary mix of detergents to safely clean transmission cooler and cooler lines in automatic, CVT, DCT and manual transmissions.

Fitment data is provided as a buying aid. Verify the listing against your vehicle and existing part before ordering.

Exact identity, part numbers, model references, and available compatibility evidence

Buying guidance

Quick decision

An identity-first transmission listing organized around stable product references and available compatibility evidence.

Fit and size notes

  • Match the complete identifier, side, position, connector, dimensions, and visible design with the existing part.
  • Treat uncertain vehicle notes as a buying aid, not as a confirmed fitment guarantee.

Specification notes

  • Canonical product: MP-US-B098LYLJ2Q
  • Source product ID: B098LYLJ2Q
  • Category: Oils & Fluids / Flushes / Transmission
  • Available images: 10
  • Style: ['Dual Tip', 'Single Tip']

Before you buy

  • Match the complete identifier, side, position, connector, dimensions, and visible design with the existing part.
  • Treat uncertain vehicle notes as a buying aid, not as a confirmed fitment guarantee.