Description
This is the longer version tool for seal Remove/Install on 4L60E, 4L80E for 1996 and newer C1500, C2500, K1500, Sierra Pickups, with V6 or V8
Tool is mandatory to remove the leaky seal around the shifter selector shaft mechanism through the transmission case.
This handy tool will let you remove and insert the seal without removing the tranny pan or in most cases without even lowering the transmission.
Install/Remove Tool includes shifter gear selector rod seal. Steel construction threaded remover and steel installer dowl
Works with transmissions that have the neutral safety switch around the transmission shift selector which requires a longer tool to remove and replace the seal
Brand New -Steel construction
Kit includes Seal
This tool is mandatory to remove the leaky seal around the shifter selector shaft mechanism through the transmission case.
This handy tool will let you remove and insert the seal without removing the tranny pan or in most cases without even lowering the transmission
The tool goes over the shaft, threads onto the leaky seal (clockwise) engaging the seal with the tool LH threads, then with the hex bolt turned the seal is efficiently removed intact.
The new seal is put over the shifter shaft and with the dowel tool pushed into place completing the installation.
Fits GM 4L60E and 4L80E.
In most cases this tool can be used without lowering the transmission or removing the transmission pan.
Rickracer –
Imported from Amazon. This is not a review of a purchase made on this website.
External marketplace context: Verified Purchase
Works great, expected no less! I’ve had a similar tool for TH350s, TH400s, 700R4s for years, works just the same.
mouiz1987 –
Imported from Amazon. This is not a review of a purchase made on this website.
External marketplace context: Verified Purchase
The tool doesnt fit caprice 96 shifter seal you should do some modification the shaft is slightly larger than the tool hole you need to grinde it and enlarge it at least 0.3mm an you need to gind the thread slightly and you need long bolt m9 to extract the seal the seal is the same when you try to set the tool to the shifter shaft use the screwdriver and puch it use the exhaust pipe as leverage and you need 19 mm spanner turn clockwise and push with screwdriver.
J. E. Simon –
Imported from Amazon. This is not a review of a purchase made on this website.
External marketplace context: Verified Purchase
Having changed the seal I can tell you that there is no chance of doing the job without this gizmo. There is no way you’re going to dig that tiny seal out and not damage the housing casting. This plucked it right out. Drove the new seal straight in. Nicely made. Sturdy. A bargain.
Sarah –
Imported from Amazon. This is not a review of a purchase made on this website.
External marketplace context: Verified Purchase
Clever little tool, worked great on my 1997 4L60E.
Kyle Barron –
Imported from Amazon. This is not a review of a purchase made on this website.
External marketplace context: Verified Purchase
When I first noticed my 4l80e leaking, I was dreading having to drop the pan, but this tool made it super easy to pull the old seal out and press the new one in. Even comes with the seal! Great price, great product. Look no further if you have a shift shaft seal leak.
Scooter Dauzat –
Imported from Amazon. This is not a review of a purchase made on this website.
External marketplace context: Verified Purchase
Used it to pull shifter linkage seal on 4l60e transmission.Worked really well
Fish –
Imported from Amazon. This is not a review of a purchase made on this website.
External marketplace context: Verified Purchase
Deep tool for long shaft. 4L60E and4L80E. Good tool.
Jeff Kozloski –
Imported from Amazon. This is not a review of a purchase made on this website.
External marketplace context: Verified Purchase
It did not fit the shaft of my 4L60e. I had to bore the hole out. And the end that is supposed to grab the seal wouldn’t grab I had to file it down on my lathe to get it to work