FIRSTINFO F3281C Crankshaft Camshaft Seal Remover Separator Puller with 2 Pairs of Hooks (4.6 Inch Long x 2 + 2.87 Inch Long x 2) Set
Rated 4.1 out of 5 based on 533 customer ratings
533 ratingsSource: Amazon
Confirm quantity, package contents, selected variation, current offer details, and store terms before placing the order.
- 【 2 Pairs of Hooks 】 Crankshaft camshaft seal remover puller set comes with 2 pieces of 118mm (4.6 Inch) long hooks and 2 pieces of 73mm (2.87 Inch) short hooks.
- 【 Well Design for Easily Fitting the Crank Seal 】 Do NOT apply too much strength when using. The strength must be “average” when applying. The reason why the design of the thickness is thin is that easy to fit the crank seal.
- 【 Without Dismantling the Crankshaft Case 】 Allows the crankshaft seal to be replaced without the dismantling.
- 【 For Universal Use Removing of Oil Seals 】 Wide range of cars with oil seals between 27~80 mm (1~3.1 Inch) in diameter
- 【 Original Patented 】 Designed and manufactured in Taiwan with premium quality. We provide you this quality assurance tool with 12+10 months after-sales warranty (10 months warranty by the register) support. Help you to achieve a satisfactory shopping experience.
Before you order
- Confirm the part number, position, dimensions, and connector details shown on this page.
- Compare the listing with the part currently installed on your vehicle.
AJ –
Imported from Amazon. This is not a review of a purchase made on this website.
External marketplace context: Verified Purchase
This tool is very useful for Installing cam/crank oil seals. Makes it so much easier on Toyota Camrys 6cyl engines because the rear cam is very tough to get to and is very challenging to install the new cam seal. This tool will make it easier. As you can see in the images I posted, it’s very useful and comes with the necessary attachments. I will say that the instructions where a little vague and I kinda had to figure out how the tool works. So for anyone wondering, the blue cups are the ones that go first, then it’s the silver cups which are adapters to extend it. You can add as many Silver adapters as needed as I did. I also wanted to point out that I do not plan on using the remover tool because it seems flimsy. I use the Lisle puller instead.
ROBERT WAREING –
Imported from Amazon. This is not a review of a purchase made on this website.
External marketplace context: Size: Removal Puller Kit|Verified Purchase
Just completed crank seal removal on my Kubota. This tool saved me tons of time and the aggravation of drilling holes iand putting in screws or fiddling with screwdrivers to pull seal out. A little pricey, but It sure works good. Seems to have durable contruction.
Cymru am Byth –
Imported from Amazon. This is not a review of a purchase made on this website.
External marketplace context: Size: Removal Puller Kit|Verified Purchase
I bought this to remove seals and bearings. But it doesn’t work. It is a shame. I had high hopes for this. Firstly the legs aren’t as long as they claim in that you can’t pull over a shaft of over 3”. Next the legs are not toughened. So when you start pulling, the hooks on the legs straighten out. Rendering it useless. Don’t waste your time and money buying this item
johnny –
Imported from Amazon. This is not a review of a purchase made on this website.
External marketplace context: Size: Removal Puller Kit|Verified Purchase
It might be fine if you’re working with seals that come out with ease but this product failed to work on a 2008 Acura TSX rear main seal with approximately 190k miles. Product comes with 2 sets of hooks, short and long. I was only able to use the short hooks because the shaft that you turn to pull the seal out isn’t long enough for the long set to work. The hooks bent out on me making this product useless. I did bend them back with pliers and made a 2nd attempt but the metal was already weakened and they bent out again.
Joel Johnson –
Imported from Amazon. This is not a review of a purchase made on this website.
External marketplace context: Size: Removal Puller Kit|Verified Purchase
The arms are made of very cheap steel. Broke trying to pull first seal. Worthless
Patrick –
Imported from Amazon. This is not a review of a purchase made on this website.
External marketplace context: Size: Removal Puller Kit|Verified Purchase
nickel très satisfait de mon achat
kadoo –
Imported from Amazon. This is not a review of a purchase made on this website.
External marketplace context: Size: Removal Puller Kit|Verified Purchase
I used this on a seal much smaller than what the description calls for and it worked. I wish I had bought it earlier because I damaged a space and bearing trying to remove the seal the old fashion way.I am sure you can bend the prongs that you insert between the seal and shaft but with a little patience and finess these seals came right out. I would buy it again but this one should last me for my llifetime.
keith froias –
Imported from Amazon. This is not a review of a purchase made on this website.
External marketplace context: Size: Removal Puller Kit|Verified Purchase
Not particularly strong metal. Due to that fact, tool was not very effective.
alm –
Imported from Amazon. This is not a review of a purchase made on this website.
External marketplace context: Size: 4.6 inch (118mm) Hooks|Verified Purchase
Perfect for what I needed
Lindsay Steele –
Imported from Amazon. This is not a review of a purchase made on this website.
External marketplace context: Size: Removal Puller Kit|Verified Purchase
I had high hopes this tool would pull out the rear camshaft seal but the tips of the puller tool legs were not strong enough and they would break off.
Dennis reagin –
Imported from Amazon. This is not a review of a purchase made on this website.
External marketplace context: Size: Removal Puller Kit|Verified Purchase
Tool worked like a champ. Advice on use; once you’ve “hooked” the seal with the arms and set the device up, take your time. Turn the handle until you feel resistance and stop. Wait for 30 or 40 seconds, then apply a little more tension. Do not “crank down” on it. Let it work. Repeat until you feel the tension gone on the handle.
Thomas –
Imported from Amazon. This is not a review of a purchase made on this website.
External marketplace context: Size: Removal Puller Kit|Verified Purchase
Für kettensägen wellendichringe wechseln
Ted –
Imported from Amazon. This is not a review of a purchase made on this website.
External marketplace context: Size: Removal Puller Kit|Verified Purchase
The smaller metal seal puller arms are not very strong or durable, one of the small arm tabs broke off while trying to remove cam seals on my 2005 3.3L Toyota Solara engine, I was very disappointed.The installer tool works without a problem.