Skip to content
Clear product details Fitment guidance Contact support
PartMatch Direct Match the identity before the order.
Sale!

ELECTRONIC IGNITION Conversion Kit for SIDE MOUNT Distributors Compatible With FORD 4-CYL SINGLE POINT 12v NEGATIVE GROUND TRACTOR MODELS 8N 500 800 series 1244A 311185 OEM Fit Kit-1514

Original price was: $149.95.Current price is: $134.95.

7 ratingsSource: Amazon

Confirm quantity, package contents, selected variation, current offer details, and store terms before placing the order.

  • BRAND: Dragon Fire Performance
  • UP TO 15% MORE ENERGY – Maintenance Free Eliminate Points for stable timing, Smoother Idle, Faster Cold Starts, Quicker Throttle Response
  • DIRECT FACTORY FIT PARTS – Simple Wiring (Black wire to negative terminal of 12v coil, Red wire to positive terminal of 12v coil, Coil must receive keyed 12v Power with no inline resistor.
  • COMPATIBLE WITH Ford 9N, 2N, 8N (Side Mount Distributor Only) For MODELS 8N 500 through 800 series 12V Negative Ground Only **Be Sure to Check for Correct Fitment Using the Chart Above. Don’t See a Chart? Message us for help.
  • WHAT’S INCLUDED – Distributor Plate, Magnetic Trigger Sleeve, Solid State Module, Ring Terminal Connectors, Brass Terminal Cap/Rotor, Suppression Style Plug Wires, and a 12v Heavy Duty Ignition Coil, Wiring Instructions

Before you order
  • Confirm the part number, position, dimensions, and connector details shown on this page.
  • Compare the listing with the part currently installed on your vehicle.
SKU: D-B09NXM1K7G Category:

Description

Product Description

FITMENT: 4-cylinder gas engines Used in 8N (SIDE MOUNT STYLE ONLY), NAA, Jubilee, (501, 600, 620, 630, 640, 650, 660, 601, 611, 621, 631, 641, 651, 661, 671, 681, 700, 800, 900, Series), 2000. And tractors using 172 4-cylinder gas engines used in 800, 900, 801, 901, 4000 Models

Restore spark to your failing electronic or factory points distributor with this new heavy-duty solid state integrated circuit module pickup conversion kit complete with OES plug wires. Perfect for converting or replacing your unstable points system. Allows for a true maintenance free, stable ignition system and conveniently fits directly into your factory distributor for an original factory look with high performance output.

  • WHAT’S INCLUDED – Distributor Plate, Magnetic Trigger Sleeve, Solid State Module, Ring Terminal Connectors, OES Spark Plug Wires
  • TECH TIPS – Minimum Coil Resistance 1.5ohms, Use of 6 Volt can damage Module, Constant 12 volts to Module without engine running not recommended
  • REQUIRED PARTS – 12 Volt Alternator, 12 Volt Coil

Part Reference Numbers: 1244A, 8N12127B, FDN12127A, 311185, FAC12127D, 8N12259

About Dragon Fire Race Series – High Performance Products

Produced in state-of-the-art facilities, the Dragon Fire brand has become a premier line of high performance ignition products for the aftermarket. Meeting the increased demand of today’s automotive enthusiasts, our exclusive line of electronic ignition components are designed for high reliability and direct fitment. With over a decade of combined R&D, Dragon Fire parts are designed, manufactured, and tested using the latest technologies and equipment, resulting in a full line of reliable performance parts with coverage across all industries, including automotive, agricultural, and marine.

For Purpose Built Competition Engines Only. Engines which are exclusively designed and built for competition can not be registered and may never be used outside of their intended purpose.

Imported customer feedback

What customers reported

3.8 / 5 7 ratings

Source: Amazon. These reviews were imported from the source marketplace and are not reviews of purchases made on this website.

2 reviews for ELECTRONIC IGNITION Conversion Kit for SIDE MOUNT Distributors Compatible With FORD 4-CYL SINGLE POINT 12v NEGATIVE GROUND TRACTOR MODELS 8N 500 800 series 1244A 311185 OEM Fit Kit-1514

  1. DrunksFromAz

    Imported from Amazon. This is not a review of a purchase made on this website.

    External marketplace context: Verified Purchase

    wires and coil worked fine, ignition was wrong one, did not try to get refund as it was over 30 days before i figured out and bought a new coil —- sell could correct if they would like to provide partial refund.

  2. Bob Galdes

    Imported from Amazon. This is not a review of a purchase made on this website.

    External marketplace context: Verified Purchase

    Parts fit as described and installed easily. Good buy, good seller. Parts arrived on time was a pleasure doing business with.

Add a review

Your email address will not be published. Required fields are marked *

Product facts

Specifications

Canonical product
MP-US-B09NXM1K7G
Source product ID
B09NXM1K7G
Category
Replacement Parts / Ignition Parts / Distributors & Parts / Distributors
Available images
5

Vehicle information

Available fitment details

Listing compatibility notes

  • BRAND: Dragon Fire Performance UP TO 15% MORE ENERGY - Maintenance Free Eliminate Points for stable timing, Smoother Idle, Faster Cold Starts, Quicker Throttle Response DIRECT FACTORY FIT PARTS - Simple Wiring (Black wire to negative terminal of 12v coil, Red wire to positive terminal of 12v coil, Coil must receive keyed 12v Power with no inline resistor.
  • COMPATIBLE WITH Ford 9N, 2N, 8N (Side Mount Distributor Only) For MODELS 8N 500 through 800 series 12V Negative Ground Only **Be Sure to Check for Correct Fitment Using the Chart Above.
  • Allows for a true maintenance free, stable ignition system and conveniently fits directly into your factory distributor for an original factory look with high performance output.
  • Meeting the increased demand of today's automotive enthusiasts, our exclusive line of electronic ignition components are designed for high reliability and direct fitment.

Fitment data is provided as a buying aid. Verify the listing against your vehicle and existing part before ordering.

Exact identity, part numbers, model references, and available compatibility evidence

Buying guidance

Quick decision

An identity-first distributors listing organized around stable product references and available compatibility evidence.

Fit and size notes

  • Match the complete identifier, side, position, connector, dimensions, and visible design with the existing part.
  • Treat uncertain vehicle notes as a buying aid, not as a confirmed fitment guarantee.

Specification notes

  • Canonical product: MP-US-B09NXM1K7G
  • Source product ID: B09NXM1K7G
  • Category: Replacement Parts / Ignition Parts / Distributors & Parts / Distributors
  • Available images: 5

Before you buy

  • Match the complete identifier, side, position, connector, dimensions, and visible design with the existing part.
  • Treat uncertain vehicle notes as a buying aid, not as a confirmed fitment guarantee.