Description
Connect to your lifestyle with a custom hitch receiver from CURT. All of our custom hitches are designed for a vehicle-specific fit, manufactured with pride, finished for industry-leading rust resistance and tested to rigorous SAE J684 standards for safety. This class 1 trailer hitch and ball mount combination is designed for a custom fit on select years of the Acura CSX, Acura ILX and Honda Civic (see application info to verify fitment). The hitch integrates with the vehicle’s frame and provides a useful and dependable 1-1/4″ x 1-1/4″ receiver. The receiver is perfect for attaching the included ball mount and towing a small trailer, or for adding cargo space with a hitch-mounted cargo carrier, bike rack or other accessory. This particular class 1 hitch is rated for 2,000 pounds gross trailer weight and 200 pounds tongue weight (never exceed the lowest-rated towing component). The ball mount included with this trailer hitch quickly and easily installs into the hitch receiver and has a 3/4″ trailer ball hole (trailer ball not included). It can be mounted in the rise or drop position to promote level towing. Like all CURT custom hitches, this class 1 hitch is protected with our co-cured finishing process. It is descaled for a smooth surface, immersed in liquid A-coat for rust resistance inside and out, covered with a durable black powder coat and finally co-cured for an industry-leading rust, chip and UV-resistant shield. No matter where you’re headed or which season of the year you’re towing in, this CURT hitch is equipped for long-lasting resilience to the elements. It features an open-back receiver for easy cleaning, and it comes with all the hardware necessary for the installation.
Imported customer feedback
What customers reported
4.4 / 5
64 ratings
Source: Amazon. These reviews were imported from the source marketplace and are not reviews of purchases made on this website.
Vehicle information
Available fitment details
Listing compatibility notes
- This class 1 hitch kit fits select model years of the Acura CSX, Acura ILX and Honda Civic TESTED FOR SAFETY.
- All of our custom hitches are designed for a vehicle-specific fit, manufactured with pride, finished for industry-leading rust resistance and tested to rigorous SAE J684 standards for safety.
- This class 1 trailer hitch and ball mount combination is designed for a custom fit on select years of the Acura CSX, Acura ILX and Honda Civic (see application info to verify fitment).
Fitment data is provided as a buying aid. Verify the listing against your vehicle and existing part before ordering.
Exact identity, part numbers, model references, and available compatibility evidence
Buying guidance
Quick decision
An identity-first drawbar hitch listing organized around stable product references and available compatibility evidence.
Fit and size notes
- Match the complete identifier, side, position, connector, dimensions, and visible design with the existing part.
- Treat uncertain vehicle notes as a buying aid, not as a confirmed fitment guarantee.
Specification notes
- Canonical product: MP-US-B00IYNRXY6
- Source product ID: B00IYNRXY6
- Category: Exterior Accessories / Towing Products & Winches / Hitches / Drawbar Hitch
- Available images: 9
Before you buy
- Match the complete identifier, side, position, connector, dimensions, and visible design with the existing part.
- Treat uncertain vehicle notes as a buying aid, not as a confirmed fitment guarantee.
Manny –
Imported from Amazon. This is not a review of a purchase made on this website.
External marketplace context: Verified Purchase
Great price and quality. The Curt Class 1 hitch for my 2012 Honda Civic was a perfect fit. The hitch is extremely well made and has a high-gloss black powder coat finish. It came with all of the fasteners and instructions. One person can install it, but it’s easier with two. The only modification was to the heat shield on the muffler. That information was included with the instructions. The way it’s designed hides most of the hitch under the car. You’ll need a tool from the auto parts store to remove the rubber shock mount for the muffler. The installation took 40 minutes. I recommend buying a Curt hitch from this seller. It arrived when promised with no damage.
Gkk –
Imported from Amazon. This is not a review of a purchase made on this website.
External marketplace context: Verified Purchase
I set to work installing this hitch on my 2012 civic after going through the video several times. There is also an instruction sheet in the package that cleared several points of doubt in my mind, ie, which screw or bold will go where, and it helped me greatly. The hardest part for me was working with the car’s exhaust. Getting it off was relatively easy, but the rubber that held the exhaust’s prongs was very tight and it needed quite a bit of muscle power to pry them off (I used the WD40 lubricant too)What was not clear to me from the video or the instructions, is what is meant by “lifting the hitch and the exhaust simultaneously”. I found this out the harder way, when I finished tightening the hitch (I had to take great care not to get my hand slip into the jagged heat shield, which would have been a bloody affair with grease thrown in). Gloves would have helped, as did my eye protection, when a bolt fell down on it (yes, I was lying down below the car as I didn’t have a way to elevate it)So after tightening the hitch with all my might as said above, I find that the piece of rubber that held the exhaust is caught between the hitch and the muffler and it was also quite inaccessible. I gave up and continued the work only next day. The rework involved loosening the hitch again, then use screw-driver and fingers (all the fingertip pushups I had done in my life must have helped) to yank the rubber over the prongs and push them through, but it was done at last, and I tightened the hitch screws for the second time taking care of that dreaded heat shield jagged edge
Namaste –
Imported from Amazon. This is not a review of a purchase made on this website.
External marketplace context: Verified Purchase
I chose this particular hitch since it took utilized two bolts on each side to attach this to the frame (all the others I saw on Amazon for my car appeared to only have one bolt on each side. For the most part installation was not difficult. I found it wasn’t necessary to remove the rubber mounting for the muffler to make room. Instead of disconnecting the rubber mount (a little difficult), I just had the rear lifted up and maneuvered the hitch into where it was needed. Trimming of the heat shield was necessary (and indicated in the instructions) because the heat shield would otherwise block the bolts and where you need to feed them through the frame. Overall I am very happy with my purchase.
marcel provencher –
Imported from Amazon. This is not a review of a purchase made on this website.
External marketplace context: Verified Purchase
thank-you
Martin D. –
Imported from Amazon. This is not a review of a purchase made on this website.
External marketplace context: Verified Purchase
S’installe facilement. Bonne qualité.
Kyle Potts –
Imported from Amazon. This is not a review of a purchase made on this website.
External marketplace context: Verified Purchase
Works great. Easy to install
David Martinez –
Imported from Amazon. This is not a review of a purchase made on this website.
External marketplace context: Verified Purchase
Product was very easy to install!!! Followed the youtube videos for make and model of my car. Product is very sturdy and true to description from manufacturer! This is an excellent product and well manufactured!
steph –
Imported from Amazon. This is not a review of a purchase made on this website.
External marketplace context: Verified Purchase
instalation sans aucun soucis!! installer sur une civic 2013 aucune modifications!!
Ryan –
Imported from Amazon. This is not a review of a purchase made on this website.
External marketplace context: Verified Purchase
I bought this to have a bike rack to haul some electric bikes and it does the job well. Its a little time consuming job but if you know what you’re doing its no problem. Great buy 👍🏼
Big Nate –
Imported from Amazon. This is not a review of a purchase made on this website.
External marketplace context: Verified Purchase
The media could not be loaded.
DZ –
Imported from Amazon. This is not a review of a purchase made on this website.
External marketplace context: Verified Purchase
This hitch kit fit perfectly in a 9th gen (2012-2015) Civic 4 door sedan. No issues on the installation, very easy to install, only took about 30 minutes to put in and the instructions are very clear. Curt always makes great quality towing accessories. Works perfectly, looks great, definitely worth it! Highly recommend! Happy towing!
Earnest T. Bass –
Imported from Amazon. This is not a review of a purchase made on this website.
External marketplace context: Verified Purchase
Nice and heavy. Put it on my Honda Civic. Very pleased with this hitch.
Robert Strahler –
Imported from Amazon. This is not a review of a purchase made on this website.
External marketplace context: fit ok, hard to install
fit ok, hard to install