Description
For fitting is callipers to a frame with no disc mounts * includes fitting bolts * retrofits any tab-less frame
Imported customer feedback
What customers reported
4.2 / 5
27 ratings
Source: Amazon. These reviews were imported from the source marketplace and are not reviews of purchases made on this website.
Vehicle information
Available fitment details
Listing compatibility notes
- About this item For fitting IS callipers to a frame with no disc mounts Includes fitting bolts Retrofits any tab-less frame For fitting is callipers to a frame with no disc mounts * includes fitting bolts * retrofits any tab-less frame
Fitment data is provided as a buying aid. Verify the listing against your vehicle and existing part before ordering.
Exact identity, part numbers, model references, and available compatibility evidence
Buying guidance
Quick decision
An identity-first spacers & adapters listing organized around stable product references and available compatibility evidence.
Fit and size notes
- Match the complete identifier, side, position, connector, dimensions, and visible design with the existing part.
- Treat uncertain vehicle notes as a buying aid, not as a confirmed fitment guarantee.
Specification notes
- Canonical product: MP-US-B00ENGDK90
- Source product ID: B00ENGDK90
- Category: Replacement Parts / Fuel System / Carburetors & Parts / Spacers & Adapters
- Available images: 4
Before you buy
- Match the complete identifier, side, position, connector, dimensions, and visible design with the existing part.
- Treat uncertain vehicle notes as a buying aid, not as a confirmed fitment guarantee.
stefano cicerchia –
Imported from Amazon. This is not a review of a purchase made on this website.
External marketplace context: Verified Purchase
montato
Timo –
Imported from Amazon. This is not a review of a purchase made on this website.
External marketplace context: Verified Purchase
Tut seinen Dienst, scheint gut zu halten.Einzig das Blech verbiegt sich beim anziehen, kleine Unterlegscheiben helfen da.Gute Lösung um Scheibenbremsen hinten nachzurüsten.Je nach Bremssattelausführung braucht ihr noch einen Adapter!Ist halt eine Nachrüstlösung, da kann es sein das Bremsbeläge und Scheibe nicht 100 Prozent übereinstimmen in der Höhe.
Jose Canas Ferreira –
Imported from Amazon. This is not a review of a purchase made on this website.
External marketplace context: Verified Purchase
Der A2z Schnellspanner hat gut gepast auf mein fahrrad
太田樹 –
Imported from Amazon. This is not a review of a purchase made on this website.
External marketplace context: Verified Purchase
良い品物です
tiposx –
Imported from Amazon. This is not a review of a purchase made on this website.
External marketplace context: Verified Purchase
Bought to further upgrade my trusty 12 year old Carrera Subway 1 that I had just converted to front discs using new replacement parts. This left the back end feeling very under-braked.The A2z clearly and correctly states that it is for flat dropouts. My dropouts have bosses on the inside where the axle butts onto the internal face of the dropout (I.e. not flat) To enable the A2z to fit flush I had to spend a few minutes with a sharp file on two edges of the said aluminium boss to achieve a fit. This is not a criticism of the product, just info.The other challenge was that my dropouts are thinner than required for a good tight fit to the A2z. This difference required several washers on each of the fixing bosses. Once I had those measurements (exactly 3mm) I made aluminium spacers and everything went together well. Washers would work though.So I fitted Clark’s Clout 1 hydraulic disc brakes front and rear (for 160mm rotors and IS mounts) which are very good value. The brakes are light years ahead of the original brakes and work in all conditions.The A2z is very well made from high quality materials and I would definitely buy one again.