Skip to content
Clear product details Fitment guidance Contact support
PartMatch Direct Match the identity before the order.
My account Cart 0
Wheel Balancer 40mm X 4mm Shaft Complete Manual Wing Hub Nut Kit/Set - Fits Accuturn, Cemb, Coats 775, 875, 1175, XR Series, FMC, Hofmann, John Bean JBC - 61072 - Made in USA

Wheel Balancer 40mm X 4mm Shaft Complete Manual Wing Hub Nut Kit/Set – Fits Accuturn, Cemb, Coats 775, 875, 1175, XR Series, FMC, Hofmann, John Bean JBC – 61072 – Made in USA

$230.43

Confirm quantity, package contents, selected variation, current offer details, and store terms before placing the order.

  • NOTE: YOU MUST CHECK THE SHAFT THREAD PITCH TO SEE IF YOU HAVE A 3MM OR 4MM BEFORE ORDERING
  • Will fit all model balancers with 40mm X 4mm thread pitch shafts (approximately 7 threads per inch)
  • KIT CONTAINS: Wing Nut, Pressure Cup & Rubber Ring
  • Fits all of the following wheel balancer models with a 40mm X 4mm thread pitch shaft: Accuturn: 1200,1220, 1250, 1400, 1420, 1450, 1500, 1520, 1550, 1650,1820 & 1850, Bosch: All Models, Cemb: All models with a 40mm diameter shaft, 1995 & later, Coats: 775, 875, 1175, XR Series
  • FMC / John Bean: All Models with a 40mm shaft, HOFMANN: All models with a 40mm diameter shaft, Kwik Way: 402, 571, HS, 572, 574, 576, 578, Launch: 408, 500, SNAP-ON: All models with 40mm shaft
  • MADE IN USA!

Before you order
  • Confirm the part number, position, dimensions, and connector details shown on this page.
  • Compare the listing with the part currently installed on your vehicle.
SKU: D-B07VNH38BZ Category:

Description

OEM Style Replacement Wing Nut for 40mm X 4mm Thread Pitch Shafts. Will fit all model balancers with 40mm X 4mm thread pitch shafts. To check, measure the diameter (40mm) and the thread spacing (4mm) on your balancer shaft. Thread spacing is the distance of one thread and one space; for example, the distance from the left edge of a thread to the left edge of the next thread. NOTE: YOU MUST CHECK THE SHAFT THREAD PITCH TO SEE IF YOU HAVE A 3MM OR 4MM BEFORE ORDERING

Reviews

There are no reviews yet.

Be the first to review “Wheel Balancer 40mm X 4mm Shaft Complete Manual Wing Hub Nut Kit/Set – Fits Accuturn, Cemb, Coats 775, 875, 1175, XR Series, FMC, Hofmann, John Bean JBC – 61072 – Made in USA”

Your email address will not be published. Required fields are marked *

Product facts

Specifications

Canonical product
MP-US-B07VNH38BZ
Source product ID
B07VNH38BZ
Category
Tools & Equipment / Tire & Wheel Tools / Wheel Alignment & Balancing Tools
Available images
2

Vehicle information

Available fitment details

Listing compatibility notes

  • Will fit all model balancers with 40mm X 4mm thread pitch shafts.

Fitment data is provided as a buying aid. Verify the listing against your vehicle and existing part before ordering.

Exact identity, part numbers, model references, and available compatibility evidence

Buying guidance

Quick decision

An identity-first wheel alignment & balancing tools listing organized around stable product references and available compatibility evidence.

Fit and size notes

  • Match the complete identifier, side, position, connector, dimensions, and visible design with the existing part.
  • Treat uncertain vehicle notes as a buying aid, not as a confirmed fitment guarantee.

Specification notes

  • Canonical product: MP-US-B07VNH38BZ
  • Source product ID: B07VNH38BZ
  • Category: Tools & Equipment / Tire & Wheel Tools / Wheel Alignment & Balancing Tools
  • Available images: 2

Before you buy

  • Match the complete identifier, side, position, connector, dimensions, and visible design with the existing part.
  • Treat uncertain vehicle notes as a buying aid, not as a confirmed fitment guarantee.

Related products