12 Volt DC Air Conditioner for Truck,12000BTU 12V Air Conditioner Unit, Parking Air Conditioner Split Electric Truck AC Unit, Van A/C Fast Cooling for Semi-Truck, Tractor, Crane, Pickup, Excavators

Name: 12 Volt DC Air Conditioner for Truck,12000BTU 12V Air Conditioner Unit, Parking Air Conditioner Split Electric Truck AC Unit, Van A/C Fast Cooling for Semi-Truck, Tractor, Crane, Pickup, Excavators
SKU: D-B0F7RFFND9

Rated 5 out of 5 based on 1 customer rating

1 ratingSource: Amazon

Confirm quantity, package contents, selected variation, current offer details, and store terms before placing the order.

About this item

Parking Air Conditioning For Truck – This Truck Air Conditioner can be supplied by either engine or external battery and remains generating even if the car engine is off. This Truck Air Conditioner is ideal for economic and environment-friendly solutions.
8 Hours Continuation – Sleeping, Standard, Strong, three modes optionable, the Air Conditioner stands 8 hours in 480 AH battery in strong mode. 8 hours in 200AH battery in Standard or Sleeping mode.
Lower than 45dB – Rated Power: 850W, 12000BTU, 20CC Scroll Compressor. High Performance Engine assures the air conditioner runs.
Inverter Cooling – This tractor inverter a/c units with an inverter is safer and quieter than a high-voltage compressor. It monitors the condition of the battery and operate and varies the frequency accordingly, thereby reduces unnecessary energy consumption.
Truck Driver’s Partner – Indoor Unit Size: 18*12*6inch; Outdoor Unit Size: 18*6*27inch(𝐂𝐚𝐧 𝐛𝐞 𝐦𝐨𝐮𝐧𝐭𝐞𝐝 𝐡𝐨𝐫𝐢𝐳𝐨𝐧𝐭𝐚𝐥𝐥𝐲, 𝐨𝐧 𝐭𝐨𝐩 𝐨𝐟 𝐭𝐡𝐞 𝐫𝐨𝐨𝐟). Fits Trucks, Semi Trucks, Cabover Semi Truck, Container Semi-truck, Tractor-Trailer, Boats, RVs, Vans, Excavators, Passenger Cars, Agricultural Vehicles, Engineering vehicles etc.

Before you order

Confirm the part number, position, dimensions, and connector details shown on this page.
Compare the listing with the part currently installed on your vehicle.

SKU: D-B0F7RFFND9 Category: Air Conditioners

Description

Product Description

Install the External Machine: Remove the casing, mark the drilling position, use an 8mm drill to drill holes, use a riveting tool to fix the rivet nut at the drilling point, install shock pads and sleeves at the holes of the external machine, and fix the external machine to the car .
Install the Expansion Valve: Remove the iron sheet at the position of the expansion valve of the evaporator, and fix the expansion valve to the evaporator. The two black screws correspond to the two holes, so there is no need to worry about wrong installation.Then wrap it in black cotton wrap.
Install the Indoor Unit: First install the wooden board to the indoor wall, and then install the evaporator on the wooden board.
Install High & Low Pressure Pipelines: First open a (50mm) hole in the car, and then install the rubber cover with three holes. The thick pipe is the low pressure pipe and is connected to the compressor. The thin tube is a high pressure tube and is connected to the condenser. Then connect the other end of the high and low pressure pipes to the holes corresponding to the expansion valve of the indoor unit, use long black screws and iron sheets to clamp the aluminum joints, and tighten the screws.
Install the Connection Line: Connect the connection lines of the internal and external units, plug the power cord plugs into each other, and connect the drain pipe of the evaporator.
Vacuuming/Adding Refrigerant: It needs to be vacuumed for 15-20 minutes, and then add refrigerant R134a/600g. The refrigerant can be added according to the pressure value. Generally, after the R134a refrigerant is injected into the air conditioning system, the pressure at the low pressure port is 35psi, and the pressure at the high pressure port is 140-180psi.
Connect the Power Cord to the Battery: Connect the power cord to the battery, pay attention to the positive and negative poles of the battery, avoid connecting them conversely, + positive / – negative. It is forbidden to connect it to the power-off switch and the power switch.
Test to see if it works: Start the Air Conditioner to see if it works. If the current is insufficient, the refrigerant is too much or not enough, the control panel will display a code, which can quickly troubleshoot.

Additional information

Size	12V-19, 12V-22, 12V-25, 12V-30, 12V-63

Imported customer feedback

What customers reported

5.0 / 5 1 rating

Source: Amazon. These reviews were imported from the source marketplace and are not reviews of purchases made on this website.

1 review for 12 Volt DC Air Conditioner for Truck,12000BTU 12V Air Conditioner Unit, Parking Air Conditioner Split Electric Truck AC Unit, Van A/C Fast Cooling for Semi-Truck, Tractor, Crane, Pickup, Excavators

Rated 5 out of 5

Alyshea – May 13, 2025

Imported from Amazon. This is not a review of a purchase made on this website.
External marketplace context: Size: 12V-19
Compared to other models, this one is quite affordable due to its aluminum evaporator. Despite the lower cost, it doesn’t compromise on performance. It provides efficient cooling and saves me money without sacrificing quality.

Add a review

Product facts

Specifications

Canonical product: MP-US-B0F7RFFND9
Source product ID: B0F7RFFND9
Category: Rv Parts & Accessories / Heating, Ventilation & Air Conditioning / Air Conditioners
Available images: 33
Size: 12V-19, 12V-22, 12V-25, 12V-30, 12V-63

Vehicle information

Available fitment details

Listing compatibility notes

Fits Trucks, Semi Trucks, Cabover Semi Truck, Container Semi-truck, Tractor-Trailer, Boats, RVs, Vans, Excavators, Passenger Cars, Agricultural Vehicles, Engineering vehicles etc.

Fitment data is provided as a buying aid. Verify the listing against your vehicle and existing part before ordering.

Exact identity, part numbers, model references, and available compatibility evidence

Buying guidance

Quick decision

An identity-first air conditioners listing organized around stable product references and available compatibility evidence.

Fit and size notes

Match the complete identifier, side, position, connector, dimensions, and visible design with the existing part.
Treat uncertain vehicle notes as a buying aid, not as a confirmed fitment guarantee.

Specification notes

Canonical product: MP-US-B0F7RFFND9
Source product ID: B0F7RFFND9
Category: Rv Parts & Accessories / Heating, Ventilation & Air Conditioning / Air Conditioners
Available images: 33
Size: ['12V-19', '12V-22', '12V-25', '12V-30', '12V-63']

Before you buy

Match the complete identifier, side, position, connector, dimensions, and visible design with the existing part.
Treat uncertain vehicle notes as a buying aid, not as a confirmed fitment guarantee.