Description
Product Description
Give your car a bold look with Lamin-x Yellow Universal Sheets. Our 4 inch by 8 inch sheet is the perfect size to do two small lights, or one light that is less than 4 inch by 8 inch in size.
This Kit Includes:
- One 4 inch by 8 inch yellow film cover
- Installation instructions
Our universal sheets are intended to be installed and trimmed to the light size.
Yellow Lamin-x Examples:
Protecting Your Fog Lights
Our Lamin-x film is 12 mils thick and is designed to take the abuse that your fog lights would normally withstand by themselves. Our film creates a protective layer that protects from:
- Sandblasting
- Small impact damage
- Hazing/cloudiness
Gracie S –
Imported from Amazon. This is not a review of a purchase made on this website.
External marketplace context: Verified Purchase
I got this small rectangular sheet that I would cut into oval type shapes to cover my white fog lights on my tundra. Removal of the actual lamps themselves were a bit of a challenge but not too too difficult, the application of the laminex was a breeze. Mind you the backing where this product adheres to is quite difficult to mark for sizing, I found that even my sharpie would glide and float upon it, making the marking tricky, at any rate, I got this done, cut up and used the wet method. I used this method to have it glide onto the lamp until it was centered, then I grabbed the wife’s blowdryer and placed on high aimed at the lamp with the laminex on it. This softened up the product and I was able to form along the slight domed design removing all bubbles. I am really impressed thus far. I wonder if it will hold up and not come undone, if it holds up with the slight wheeling I do, I would say this product is PERFECT, only time will tell, but today, I rate it at 5 stars as its appearance and application is pretty amazing, thanks laminex.
kristofuh –
Imported from Amazon. This is not a review of a purchase made on this website.
External marketplace context: Verified Purchase
There’s enough material for 1 layer on 6 standard light pods. It gives just enough yellow tint to offset the LED blue light reflection & glare in heavy fog. If you want a more dense yellow you can always add another layer. The material is really thick, super flexible and feels heavy duty. Was really easy to apply by starting at one end of removing the backing and pressing with the fingers as the backing was peeled away. It really sticks well but doesn’t leave any adhesive residue when pulled off, which is really surprising. I had to wrestle with it a little bit to pull it off and correct the positioning when it was a little crooked but it was not a problem to do that. It has instructions for both wetting the adhesive first but isn’t necessary. Am really happy with this.
marco santos –
Imported from Amazon. This is not a review of a purchase made on this website.
External marketplace context: Verified Purchase
Highly recomended good quality aslong you do the proper instalation. In this you can put 2 films on your fog lights make you sure to cut it on properly base on the size of your fogs.
Douglas –
Imported from Amazon. This is not a review of a purchase made on this website.
External marketplace context: Verified Purchase
Used this on 7” KC led lights since they don’t come in a yellow option, nor do they sell a yellow filter (only amber). Easy to install, great instructions, has held up well and makes the lights the exact color of yellow I wanted.
DroptheMike –
Imported from Amazon. This is not a review of a purchase made on this website.
External marketplace context: Verified Purchase
No dislikes for me with this product. I did the “wet install” by spraying my fog lights with water and it seemed to work really well. Since the light was curved, some bubbles were occurring at the edges but once the water was gone I could slowly get all the bubbles out. Took about 15 minutes to install both sides after measuring the lights and cutting to size with scissors. Thanks!
Chappy –
Imported from Amazon. This is not a review of a purchase made on this website.
External marketplace context: Verified Purchase
Good quality but too pricey, $10 for a 4”x8”.
reagan –
Imported from Amazon. This is not a review of a purchase made on this website.
External marketplace context: Verified Purchase
Still on my fog lights so far. Lets see how long it will stay. Looks good and good quality
Keith C. –
Imported from Amazon. This is not a review of a purchase made on this website.
External marketplace context: Verified Purchase
I’ve used Laminex before on headlights/driving lights with good results.This time I needed to cover driving lights & I used a circular template to cut from the sheet. Application was easy-peasy; spray water on the light, peel the backing off & attach to the light. Use a credit card to lightly smooth the film from the center out to squeegee the water & bubbles out to the edges. I also used a heatgun on low heat carefully to finish the process.Great effect on the lights & Laminex will protect from rock chips & other road damage. When the Laminex film becomes pockmarked & dull in a couple of years, peel it off & put new product on. You can’t do that with the original glass surface!
Owen Mstar –
Imported from Amazon. This is not a review of a purchase made on this website.
External marketplace context: Verified Purchase
I was able to apply them pretty easily, but they look a little green with my LED fog lamps
midliferider –
Imported from Amazon. This is not a review of a purchase made on this website.
External marketplace context: Verified Purchase
I am a very serious motorcycle rider, All 7 Continents, and more than 2 Million Miles, so I know how important it is to BE SEEN by other vehicles.I convert all the driving lights, fog lights, aux lighting on all my vehicles, cars, and motorcycles, by installing this YELLOW film directly onto the clear lens of the accessory lighting, and it makes a world of difference.In a sea of white lights…these YELLOW lights will be seen, and it costs almost nothing to change your white lights to yellow. They stick on very easily, can be removed if you really need to, and will last the lifetime of your vehicle.
Karsten Petersen –
Imported from Amazon. This is not a review of a purchase made on this website.
External marketplace context: Verified Purchase
Tried applying to a slightly convex fog light. It won’t go on without bubbles and doesn’t stick well. Also, the tint is not dark enough to make them really yellow – it’s more like a light yellowish hue. Wasted $ and straight to the garbage bin.
DHill –
Imported from Amazon. This is not a review of a purchase made on this website.
External marketplace context: Verified Purchase
This is a good quality plastic laminate for fog lights. Note that you may need 2 sheets. For my typ driving lights which are oval and about 5 and 5/8ths” at longest dimension, I needed two 4×8” sheets. 4 star rating cause there should be a choice of sizes to minimize waste.
Anon –
Imported from Amazon. This is not a review of a purchase made on this website.
External marketplace context: Verified Purchase
Exactly what I needed to change the color output on the fog lights of my 22′ KLR 650 and they add a little layer of protection.