Skip to content
Clear product details Fitment guidance Contact support
PartMatch Direct Match the identity before the order.

Caltric 2 Front Knuckle Lower Upper Ball Joint Compatible With John Deere Xuv Gator 625 I 825 I Gas

$50.99

62 ratingsSource: Amazon

Confirm quantity, package contents, selected variation, current offer details, and store terms before placing the order.

  • Order Includes: 2x Upper Ball Joint And 2x Lower Ball Joint
  • Compatible With John Deere: Xuv855e Gator Utility Vehicle -Pc13313, Xuv825e Gator Utility Vehicle -Pc13310 Not For California, Xuv Gator Utility Vehicle 625i (Gas) -Pc9957 Serial Number 110001 And Up, Xuv Gator Utility Vehicle 855d (Diesel) -Pc9959 Serial Number 110001 AND Up
  • Part Numbers: Upper Ball Joint: AM146066, Lower Ball Joint: AM142542, AUC12838
  • Dimensions: Upper Ball Joint: Item Length: 41 mm – 1.6 in, Item Height: 90.1 mm – 3.5 in, Ball Stud Size: 13.8 mm – 0.5 in, Lower Ball Joint: Item Length: 34 mm – 1.3 in, Item Height: 71 mm – 2.8 in, Ball Stud Size: 13.7 mm – 0.5 in
  • We strongly suggest comparing the posted picture to the unit(s) that needs to be replaced.

Before you order
  • Confirm the part number, position, dimensions, and connector details shown on this page.
  • Compare the listing with the part currently installed on your vehicle.
SKU: D-B07MDGST1P Category:

Description

Product Description

We are the largest Powersports & Mower part supplier in the country. We are committed to offering an extensive selection of the finest quality replacement parts.

Compatible With John Deere:

  • A3-T M Gator -Pc12542
  • M-Gator A3 -Pc10887 Serial Number 110001 And Up
  • Xuv Gator Utility Vehicle 625i (Gas) -Pc9957 Serial Number 110001 And Up
  • Xuv Gator Utility Vehicle 825i (Gas) -Pc9958 Serial Number 110001 And Up
  • Xuv Gator Utility Vehicle 855d (Diesel) -Pc9959 Serial Number 110001 And Up
  • Xuv Gator Utility Vehicle -Pc11573
  • Xuv Gator Utility Vehicle -Pc11574
  • Xuv825e Gator Utility Vehicle -Pc13310 Not For California
  • Xuv825m Gator Utility Vehicle -Pc13309 Not
  • Xuv825m S4 Gator Utility Vehicle -Pc13308 Not For California
  • Xuv855e Gator Utility Vehicle -Pc13313
  • Xuv855m Gator Utility Vehicle -Pc13312
  • Xuv855m S4 Gator Utility Vehicle -Pc13311

Ball Joint – Specifics:

Type: Lower or Upper Ball Joints
Upper Ball Joint OEM: AM146066
Item Length: 41 mm – 1.6 in
Item Height: 90.1 mm – 3.5 in
Ball Stud Size: 13.8 mm – 0.5 in
Lower Ball Joint OEM: AM142542, AUC12838
Item Length: 34 mm – 1.3 in
Item Height: 71 mm – 2.8 in
Ball Stud Size: 13.7 mm – 0.5 in
Item Weight: 1.14 Lb
Product Specific: With Thread / Castle nuts and snap rings
Material: Metal
Number In pack: 4

Imported customer feedback

What customers reported

3.6 / 5 62 ratings

Source: Amazon. These reviews were imported from the source marketplace and are not reviews of purchases made on this website.

10 reviews for Caltric 2 Front Knuckle Lower Upper Ball Joint Compatible With John Deere Xuv Gator 625 I 825 I Gas

  1. Joshua p lucas

    Imported from Amazon. This is not a review of a purchase made on this website.

    External marketplace context: Verified Purchase

    Exactly what I ordered and fit perfectly

  2. Steve L.

    Imported from Amazon. This is not a review of a purchase made on this website.

    External marketplace context: Verified Purchase

    Shipping was fast and parts were correct.

  3. M. Weber

    Imported from Amazon. This is not a review of a purchase made on this website.

    External marketplace context: Verified Purchase

    Fit my 825i perfectly. I got both sides for about 1/4 of the price of one side from Deere.

  4. Customer

    Imported from Amazon. This is not a review of a purchase made on this website.

    External marketplace context: Verified Purchase

    Liked price and quality

  5. customer

    Imported from Amazon. This is not a review of a purchase made on this website.

    External marketplace context: Verified Purchase

    I put these on just over a year ago. They are worn out and need to be replaced again already (visible slop and obvious camber due to the worn joint). The rubber boots are completely cracked and falling apart and the upper joints are sloppy. I will be paying the extra money for original John Deere joints this time.

  6. David Byrd

    Imported from Amazon. This is not a review of a purchase made on this website.

    External marketplace context: Verified Purchase

    The lower ball joint will not fit into the control arm of a John Deere 825i. The threaded stud is too large for the hole of the original Deere control arm. I purchased these ball joints and threw them away. I ordered original ball joints from John Deere and the replacement / Installed was completed without any issues.

  7. tijos

    Imported from Amazon. This is not a review of a purchase made on this website.

    External marketplace context: Verified Purchase

    C’est pièces sont mal usine de sortes que une fois installé elles entrent en contact avec le join de cardans avant et à l’arrière elles n’entrent tout simplement pas dans l’orifice.

  8. Jamie Cole

    Imported from Amazon. This is not a review of a purchase made on this website.

    External marketplace context: Verified Purchase

    These are the cheapest made products from China. I purchased some others from this same supplier that were much better. These are poorly made – I will be replacing them with genuine OEM parts as soon as hunting season is over.

  9. don mccurdy

    Imported from Amazon. This is not a review of a purchase made on this website.

    External marketplace context: Verified Purchase

    Quality and price of product was on opening very good fitting was fine no problems checking them on the vehicle after 6 months found the rubber covers totally perished although the joints were still ok I can’t see them lasting being exposed to the elements

  10. Doug Smith

    Imported from Amazon. This is not a review of a purchase made on this website.

    External marketplace context: Verified Purchase

    Items arrived on time and appear to be a direct replacement. Installed them yesterday and they seem to have fixed my problem. Deere wanted $89 each for uppers and $86 for lowers… This price was much better.

Add a review

Your email address will not be published. Required fields are marked *

Product facts

Specifications

Canonical product
MP-US-B07MDGST1P
Source product ID
B07MDGST1P
Category
Replacement Parts / Shocks, Struts & Suspension / Ball Joints
Available images
7

No structured vehicle fitment data is available. Compare the listing with the vehicle and existing part before ordering.

Exact identity, part numbers, model references, and available compatibility evidence

Buying guidance

Quick decision

An identity-first ball joints listing organized around stable product references and available compatibility evidence.

Fit and size notes

  • Match the complete identifier, side, position, connector, dimensions, and visible design with the existing part.
  • Treat uncertain vehicle notes as a buying aid, not as a confirmed fitment guarantee.

Specification notes

  • Canonical product: MP-US-B07MDGST1P
  • Source product ID: B07MDGST1P
  • Category: Replacement Parts / Shocks, Struts & Suspension / Ball Joints
  • Available images: 7

Before you buy

  • Match the complete identifier, side, position, connector, dimensions, and visible design with the existing part.
  • Treat uncertain vehicle notes as a buying aid, not as a confirmed fitment guarantee.