Skip to content
Clear product details Fitment guidance Contact support
PartMatch Direct Match the identity before the order.

Power Steering Pressure Hose Assembly Replacement for Honda Odyssey V6 3.5L 2005 2006 2007 (# 53713-SHJ-A01)

$35.89

708 ratingsSource: Amazon

Confirm quantity, package contents, selected variation, current offer details, and store terms before placing the order.

About this item

  • Condition: well packed
  • Replace Park Number: 53713-SHJ-A01, 53713SHJA01
  • Replacement for Honda Odyssey V6 3.5L 2005-2007. Professional installation is highly recommended
  • Workmanship: With great sealing performance, this power steering pressure hose is used to replace your leaking hose
  • Please compare the specific applicable models listed at below to make sure it’ll fit

Before you order
  • Confirm the part number, position, dimensions, and connector details shown on this page.
  • Compare the listing with the part currently installed on your vehicle.
SKU: D-B01NAO374I Category:

Description

Product Description

Power Steering Pressure Hose

Part number 53713-SHJ-A01
Replace 53713-SHJ-A01 , 53713SHJA01
Cross-Reference 2647-498147, 5-55172,365543, 92164, 55172, 37238, 37239, 36-365543
Fitment Replacement for Honda Odyssey V6 3.5L 2005 2006 2007

High-quality hose assemblies

Every hose is subjected to a high pressure quality test before leaving the factory, ensuring trouble free installation and operation of your new hose

Zinc-coated tubes

Protest again rust and correction. Good material&Advanced technology& strict quality control ensure high quality

Swith sockets

Allow pressure current. High quality makes sure long usage life.

Locating tabs

Prevent rotation during installation. Quick delivery.

Why choose us?

1. Professional

Professional auto parts supplier, provide you with original equipment equivalentl quality.

2.Large in stock

Large in stock, we can send the items to you in a short time.

3.24h service

24 hours service, if any problem after you recieved the goods, just send your feedback, the best solution will be offered.

Cautions:

  • Professional installation is highly recommended.
  • Since this hose is not the same shape as OEM but it does work. It’s a replacement&improvement.

Imported customer feedback

What customers reported

4.4 / 5 708 ratings

Source: Amazon. These reviews were imported from the source marketplace and are not reviews of purchases made on this website.

11 reviews for Power Steering Pressure Hose Assembly Replacement for Honda Odyssey V6 3.5L 2005 2006 2007 (# 53713-SHJ-A01)

  1. EmorRob

    Imported from Amazon. This is not a review of a purchase made on this website.

    External marketplace context: Verified Purchase

    I saved about $350 installing this myself on a 2007 Odyssey. Almost had an “oh, sh*t” moment when I compared the new to the old. The shape and rubber grommets didnt exactly match the original one that I removed so I heard that “Honda Genuine” argument in my head. But dont worry. This is a replacement AND improvement. The bends in the hose for the new hose eliminate the need for the additional grommet.I would recommend watching several YouTube vids on the process. My experience: I had to dremel cut the old hose close to the PS pump and then remove the bolt with a socket wrench. Remove the old sensor to reuse it. This requires a lot of leverage to get that sensor off. From under the car, start near the PS pump and snake the new hose end toward the passenger side and up around the belts. Loosely attach the screw and rubber grommet to help keep the hose in the right place. Seat the hose in the PS pump and finger tighten. Attaching the new one was a little tricky because I was scared of cross threading. When you’re confident its seated well, finish with a crows foot. I didnt have much room to work with so this took a while to tighten with short cranks on the wrench.

  2. cugrad

    Imported from Amazon. This is not a review of a purchase made on this website.

    External marketplace context: Verified Purchase

    As previously mentioned this hose is not the same shape as OEM but it does work. It looks to be high quality and most likely not similar cheap ones manufactured in China. The hardest part was getting the connecter underneath the car where the crow’s foot is required. That didn’t work for me so I finally sawed the metal tube off and used a socket. The new cable only has one (vs 2) rubber grommet connections. The one provided is placed close to the above difficult connection where one of the old hose ones was located.. But it does definitely seem stable and does the job nicely. I also replaced all 3 Honda gaskets. One on the switch, I replaced the one that came with the hose that attaches to the top of the power steering pump, plus the one on the front of the power steering pump. I was having some noises beforehand which turned out to be the front power steering pump gasket… fortunately found in a youtube video. It also took only approx 2 new bottles of Honda transmission fluid to refill the reservoir/system. Super happy I went with this hose… it fits most nicely. And instead of $500 at the dealer which I was quoted the job was only $30 (plus 2-3 hours of my time). ps – the taking the switch off to then put on the new hose takes a skinny/thin wrench.

  3. M.L.A.

    Imported from Amazon. This is not a review of a purchase made on this website.

    External marketplace context: Verified Purchase

    06 Honda Odyssey… This was my 1st time doing this job so it took me quite a few hours to complete the job. After getting EVERYTHING done, I started my vehicle and recognized that fluid was shooting from the “new” hose 😡. I was hesitant to purchase this because of the price but decided to give it a shot… BAD IDEA!! Poor quality, don’t waste your time and money on this.

  4. Lionel Cortez

    Imported from Amazon. This is not a review of a purchase made on this website.

    External marketplace context: Verified Purchase

    I installed it on a 2003 Honda Accord and it was a b!$#* to install . The worst part is snaking it to the other side. It works perfectly but it really is a headache to install .If you don’t have the right tools and if you don’t have patience just pay a mechanic.But if you do install it on your own and you get everything done correctly it is very satisfying, and you save a little extra money , Great product overall. I highly recommend this for DIYSelvers .

  5. riz

    Imported from Amazon. This is not a review of a purchase made on this website.

    External marketplace context: Verified Purchase

    right fit, good product.

  6. Very well done!!

    Imported from Amazon. This is not a review of a purchase made on this website.

    External marketplace context: Verified Purchase

    Amazon sent item on time, quick service and packaged well. The part itself was not exact as an OEM part but it worked.

  7. Trey Ellis

    Imported from Amazon. This is not a review of a purchase made on this website.

    External marketplace context: Verified Purchase

    Fit like a glove. Installed on n about half a hour. No leaks, all good

  8. Fernando

    Imported from Amazon. This is not a review of a purchase made on this website.

    External marketplace context: Verified Purchase

    Le quedo perfecta a mi camioneta

  9. thyanis santiago

    Imported from Amazon. This is not a review of a purchase made on this website.

    External marketplace context: Verified Purchase

    Husband was pleased with his order for the car perfect.

  10. Tubo loco

    Imported from Amazon. This is not a review of a purchase made on this website.

    External marketplace context: Verified Purchase

    Un poco diferente en sus vueltas pero encaja perfectamente

  11. L Romo

    Imported from Amazon. This is not a review of a purchase made on this website.

    External marketplace context: Verified Purchase

    Perfect fit for 2007 odyssey! No leaks

Add a review

Your email address will not be published. Required fields are marked *

Product facts

Specifications

Canonical product
MP-US-B01NAO374I
Source product ID
B01NAO374I
Category
Replacement Parts / Steering System / Power Steering / Pressure Hoses
Available images
8
Referenced part numbers
53713-SHJ-A01

No structured vehicle fitment data is available. Compare the listing with the vehicle and existing part before ordering.

Exact identity, part numbers, model references, and available compatibility evidence

Buying guidance

Quick decision

An identity-first pressure hoses listing organized around stable product references and available compatibility evidence.

Fit and size notes

  • Verify the referenced part number: 53713-SHJ-A01.
  • Match the complete identifier, side, position, connector, dimensions, and visible design with the existing part.
  • Treat uncertain vehicle notes as a buying aid, not as a confirmed fitment guarantee.

Specification notes

  • Canonical product: MP-US-B01NAO374I
  • Source product ID: B01NAO374I
  • Category: Replacement Parts / Steering System / Power Steering / Pressure Hoses
  • Available images: 8
  • Referenced part numbers: ['53713-SHJ-A01']

Before you buy

  • Verify the referenced part number: 53713-SHJ-A01.
  • Match the complete identifier, side, position, connector, dimensions, and visible design with the existing part.
  • Treat uncertain vehicle notes as a buying aid, not as a confirmed fitment guarantee.