CBW-088 Supercharger Solid Isolator Supercharger solid state isolator coupler pulley Compatible With 09-15 Cadillac CTS-V 6.2L LSA Supercharged,12-15 Camaro ZL1 6.2L LSA Supercharged
$21.11
Rated 2 out of 5 based on 1 customer rating
1 ratingSource: Amazon
Confirm quantity, package contents, selected variation, current offer details, and store terms before placing the order.
- √【Compatible with】:Supercharger Solid Isolator Compatible With 2009-2015 Cadillac CTS-V 6.2L LSA Supercharged，2012-2015 Camaro ZL1 6.2L LSA Supercharged.
- √【High-Quality】:Supercharger Solid Isolator Made from Delrin (Polyoxymethylene POM) is the ideal material in parts designed to replace metal. It combines low-friction and high-wear resistance with the high strength and stiffness such applications require.
- √【Process Upgrading】:This spring mechanism in the original isolator wears a groove in your supercharger shaft, producing debris that will cause shaft seal failure. The New Solid Isolator is a direct replacement for stock unit. The new isolator is not susceptible to failure or fatigue. It is CNC machined from a solid piece.
- √【Perfectly Fit】:Our heavy duty isolator is not susceptible to the problems associated with the factory GM isolator.Perfect replacement for an original part.Replace #CBW-088
- √【Note】:Please confirm that the parts are the correct ones you need before purchasing.
Before you order
- Confirm the part number, position, dimensions, and connector details shown on this page.
- Compare the listing with the part currently installed on your vehicle.
DANIEL B. –
Imported from Amazon. This is not a review of a purchase made on this website.
External marketplace context: Verified Purchase
The 6 pin holes are too small. the pins measure 7mm and the holes are substantially smaller. had to machine the faces of the isolator too as it was off a good bit and put too much pressure on the inside bearing. You will need a letter “J” drill bit as a 7mm puts too much bind on the bearings when assembling. If you don’t have a mill a block of 300 grit sand paper to flatten and resize the face and back.