Description
This sale is for a gallon of fast dry black 2.1 lbs/gallon voc epoxy primer (SMR-260B) and a quart can of epoxy catalyst (SMR-261). The SMR-260 is 2.1 lbs/gallon voc and compliant everywhere. The SMR-260 is a fast dry, easy sanding 2K epoxy primer with great color and gloss holdout. SURFACE PREPARATIONS Clean surface with a Wax and Grease Remover. Sand metals or old paint with 180-220 grit and re-clean. SPRAY GUN SETUP HVLP Gun: Fluid Tip 1.3-1.6 mm, Spray Pressure 8-10 psi APPLICATION Epoxy Primer should be applied in medium wet coats, with a 10-minute flash period between each (at 70 °F). One to two coats is enough to achieve the desired dry film thickness. Epoxy primer may be topcoated after approximately 30 minutes per coat, or up to about 3 days. After three days, the primer MUST be sanded prior to topcoat application.
Imported customer feedback
What customers reported
4.4 / 5
184 ratings
Source: Amazon. These reviews were imported from the source marketplace and are not reviews of purchases made on this website.
No structured vehicle fitment data is available. Compare the listing with the vehicle and existing part before ordering.
Exact identity, part numbers, model references, and available compatibility evidence
Buying guidance
Quick decision
An identity-first primers listing organized around stable product references and available compatibility evidence.
Fit and size notes
- Match the complete identifier, side, position, connector, dimensions, and visible design with the existing part.
- Treat uncertain vehicle notes as a buying aid, not as a confirmed fitment guarantee.
Specification notes
- Canonical product: MP-US-B016QO0MIS
- Source product ID: B016QO0MIS
- Category: Paint & Paint Supplies / Paints & Primers / Primers
- Available images: 1
Before you buy
- Match the complete identifier, side, position, connector, dimensions, and visible design with the existing part.
- Treat uncertain vehicle notes as a buying aid, not as a confirmed fitment guarantee.
Lee Bradshaw –
Imported from Amazon. This is not a review of a purchase made on this website.
External marketplace context: Verified Purchase
This product works great, it was easy to mix, poured well and covered great. It was my first time painting with a cheap gun and my coat was really rough, but I feel that was just me. It sanded down well after setting for 24 hrs. I put a coat of 2k primer on top of this from the same company and had no problems.
TJCraftsman –
Imported from Amazon. This is not a review of a purchase made on this website.
External marketplace context: Verified Purchase
Great epoxy. Quick drying. Smooth spraying. Good coverage. Seems tough. Followed with hot rod black on some steel patio furniture and it looks better than new! Don’t forget reducer. Don’t forget your respirator.
Aaron F. –
Imported from Amazon. This is not a review of a purchase made on this website.
External marketplace context: Verified Purchase
Im no professional painter. Just really handy. I needed to do some repainting on my JKU this worked well for me. I took autobody class in high school but havent kept up with it so lots of things have changed in paint technology over the several decades since I graduated. What I can say is this worked well for me. Sanded my hood down and had some bare metal in spots. I laid down 2-3 thick coats (no runs or sags) and blocked it out with some wet sandpaper. It sanded easily and dried fast. Base went over it no issues and did a good job of sealing everything.
Customer –
Imported from Amazon. This is not a review of a purchase made on this website.
External marketplace context: Verified Purchase
Easy to mix/spray. Do need to cut it with reducer. Sprayed with a 1.4 tip and seemed to do well.
virgil steffensen –
Imported from Amazon. This is not a review of a purchase made on this website.
External marketplace context: Verified Purchase
Really good epoxy primer. I have used this as my main primer on my 1951 Pontiac hot rod. I used it under Raptor bed liner under my hood and single stage urethane for my interior trim. It is pretty thick,but easy enough to spray. My only issue is once you open the can it seems to thicken and I had to throw away about a quart and a half the last time I used it. Still,it is really good primer for the money.
Arturo rivera –
Imported from Amazon. This is not a review of a purchase made on this website.
External marketplace context: Verified Purchase
Sprays super smooth and dries fast, by the time I got around the truck with the first coat, it was ready for the second! Great product!
mike –
Imported from Amazon. This is not a review of a purchase made on this website.
External marketplace context: Verified Purchase
My problem on this order was the fact that I made a mistake when I ordered. I made the mistake of ordering the color black, instead of the color gray. Gray is what I’ve been using in the past. Problem: was informed that I could not return the item! I hadn’t even opened the box, after discovering the mistake. One hundred and fifty dollar mistake!!
jordie24 –
Imported from Amazon. This is not a review of a purchase made on this website.
External marketplace context: Verified Purchase
Overall product is ‘meeeehhhh’ compared to some better / similar products that I’ve used. The major difference is the customer support … or shall we be more specific…lack thereof. If you have any questions, you’ll be ignored…even after spending a few HUNDRED dollars on their products (epoxy primer, top coat, reducer, activators, clear coats, etc)