Monroe Monro-Matic Plus 32238 Suspension Shock Absorber for Ford Ranger
$27.39
Rated 4.3 out of 5 based on 263 customer ratings
263 ratingsSource: Amazon
Confirm quantity, package contents, selected variation, current offer details, and store terms before placing the order.
About this item
- COMPATIBILITY – Fits 1983-1997 Ford Ranger; 1998-2011 Ford Ranger; 1994-1997 Mazda B3000; 1998-2008 Mazda B3000; 1994-1997 Mazda B4000; 1998-2009 Mazda B4000
- GET THE RIGHT PART — Before purchasing, please check the “imaginebroward.org Confirmed Fit” bar to ensure this part will fit your vehicle; enter all vehicle information (year, make, model, engine and trim) for compatibility and check qualifier notes. If the “imaginebroward.org Confirmed Fit” bar has an “i” in a blue circle, this product has additional notes. Please hover over the “i” on the bar to see notes before making your purchase
- CONSISTENT RIDE — Velocity Proportional Valving (VPV) technology and all-weather fluid containing special additives to reduce friction and ensure smooth rod reaction and an overall smoother ride
- RELIABLE PERFORMANCE — Nitrogen gas-charge maintains tire-to-road contact for improved ride and handling by reducing aeration
- RESTORES RIDE AND HANDLING — Larger bore provides more efficient damping control to provide consistency and a smooth ride (where applicable)
- BUILT TO LAST — Self-lubricating fluid seal retains gas and reduces excessive friction against the piston rod to help reduce premature wear while banded piston and bronze reinforced guide provide durability
- GET MORE MILES FROM YOUR RIDE — Designed and validated to meet OE spec and deliver consistent performance
Before you order
- Confirm the part number, position, dimensions, and connector details shown on this page.
- Compare the listing with the part currently installed on your vehicle.
david fowler –
Imported from Amazon. This is not a review of a purchase made on this website.
External marketplace context: Verified Purchase
i ordered 2 of these 32238 rear shock absorbers for my 2010 mazda b4000 ( ford ranger )what i received was 1 32238 rear shock and 1 32338 front shock for another vehicle ( packaging error at tenneco not amazon`s fault )although tenneco lists the 32296 as the proper front shock , the 32338 front shock actually fits the 4×4 ranger pickups far better as it allows full front suspension droop, and it allows the top retension nut to be tightened without lifting the lower front control armand with no binding .where as the 32296 shock , you have jack up front lower control arms in order to tighten the top retension nut to the shaft and it limits front suspension down travel.the only draw back is that you have remove the factory bump stop and install a aftermarket polyurethane bump stop init`s placeotherwise the front shock will contact the bump stop on hard braking
Spencer –
Imported from Amazon. This is not a review of a purchase made on this website.
External marketplace context: Verified Purchase
These are a great shock, that really smoothed out the ride of my truck. I have a 2003 Ford Ranger Edge 2WD. I leveled the front a couple years ago and put 32 x 11.5 x 15 tires on. I left the stock shocks on and it was bumpy. Since then I have tried the following shocks to help compensate for the big tires and the lift, and all were too stiff. I am very glad I found the Monro-matic’s. I finally have a comfortable ride again.- Bilstein HD – extremely firm, rough ride. I do not recommend for a midsize truck.- Rancho RS5000 – pretty rough ride on the road, but nice off road. All and all not what I was looking for- Monroe Sensa-Track – better than the Bilstein and the Rancho’s. They were a nice shock but still had a stiff ride Another thing to note: If you have a leveled Ford Ranger Edge, Monroe 32338 are a perfect fit for a lifted front. This shock number was made for a 2003-2005 Jeep Grand Cherokee. I did a lot of research to find this length of shock.
M. Biage –
Imported from Amazon. This is not a review of a purchase made on this website.
External marketplace context: Verified Purchase
2004 Ranger XLT flareside 4.0L 4×4.Fit well, first shock job on the truck and with living in the mid-west things were rusty.One lower bolt/nut came out without a hitch, the other would have required a torch and probably new hardware.Used a grinder to cut through the shock body sleeve then a hammer and chisel to punch through the last bit of metal, had I kept going with the grinder I would have had to fabricate a new lower shock mount.Worked well, as intended.
Melanie –
Imported from Amazon. This is not a review of a purchase made on this website.
External marketplace context: Verified Purchase
Ordered the wrong pair the first time . This shock fits a 4×4 Ranger
Consumer –
Imported from Amazon. This is not a review of a purchase made on this website.
External marketplace context: Verified Purchase
Bought this rear and front shocks and its cool for the price but once installed wow they totally a failure my truck bounces and when making sharp turns feels like im going to tip over i do have swaybars . I will be returning them . Also im running 35 inch tires with leveling kit
Customer –
Imported from Amazon. This is not a review of a purchase made on this website.
External marketplace context: Verified Purchase
Great improvement in ride and stability.
Brennan R. –
Imported from Amazon. This is not a review of a purchase made on this website.
External marketplace context: Verified Purchase
Easy enough to install if you’re competent with tools and vehicles. Made a huge difference when towing and hauling, not to mention the lack of constant vibration and bumpiness during regular driving now. I was actually getting lower back pain from long drives in my 98 Ranger. After replacing them, I’ve put nearly 600 miles on them in 2ish weeks, with some towing, and my back feels great. All for $40!
Real Customer (not a fake reviewer) –
Imported from Amazon. This is not a review of a purchase made on this website.
External marketplace context: Verified Purchase
Acceptable quality at this price point. Fit perfectly on 2009 Ford Ranger.
Steve –
Imported from Amazon. This is not a review of a purchase made on this website.
External marketplace context: Verified Purchase
Fits well
Kris –
Imported from Amazon. This is not a review of a purchase made on this website.
External marketplace context: Verified Purchase
Great shocks for the money. Fit and work as they should.
Miguel Angel Lopez Aulis –
Imported from Amazon. This is not a review of a purchase made on this website.
External marketplace context: Verified Purchase
Cumple con su función. De buena marca.
TB13 –
Imported from Amazon. This is not a review of a purchase made on this website.
External marketplace context: Verified Purchase
Can’t beat the price on this replacement shock. Installed on a 2006 Ford Ranger without a problem.
joe poster –
Imported from Amazon. This is not a review of a purchase made on this website.
External marketplace context: Verified Purchase
Worked great