Skip to content
Clear product details Fitment guidance Contact support
PartMatch Direct Match the identity before the order.
My account Cart 0
Motobilt Dana 44 Front Axle Truss for JK Rubicon

Motobilt Dana 44 Front Axle Truss for JK Rubicon

$171.48

Confirm quantity, package contents, selected variation, current offer details, and store terms before placing the order.

  • JK Rubicon Dana 44 front axle truss system
  • Top caps are CNC cut from 1/4 inch high strength steel plate
  • Front and rear caps are CNC cut from 1/8 inch high steel plate
  • Includes short and long side 1/4 inch top cap and 2 1/4 inch vertical supports and 5 1/8 inch front and back dimpled plates
  • Sold as kit
  • Weight = 18lbs
  • This kit requires 3 inch bump stop extensions to keep the truss from contacting the oil pan. Bump stop extensions would be used to keep larger tires like 35 and up from contacting the fenders when articulated

Before you order
  • Confirm the part number, position, dimensions, and connector details shown on this page.
  • Compare the listing with the part currently installed on your vehicle.
SKU: D-B0BSHBHBJN Category:

Description

The Motobilt JK Rubicon Dana 44 front axle truss is a great way to beef up the axle tubes on your JK and JK Unlimited. The Motobilt JK Rubicon Dana 44 front axle truss system is a quick way to add strength and style to your vehicle. The Motobilt truss wraps around the stock upper passenger side link and extends out to both the driver and passenger side coil spring mounts for added strength throughout the length of the axle. You will see in some of the pictures that the truss fits very tight. We have noticed some slight differences in the axles from the manufacturer. Some slight grinding may be required during the installation process. The top caps are CNC cut from 1/4 inch high strength steel plate and is slotted to align the front and back vertical caps. The front and rear caps are CNC cut from 1/8 inch inch high steel plate. The plates are dimpled to add strength and cross section width to the parts. Essentially we can keep the axle a little lighter and make it look very cool with the dimple die holes. The kit includes a short and long side 1/4 inch top cap, two 1/4 inch vertical supports, and five 1/8 inch front and back dimpled plates. This kit requires an experienced welder to install on the vehicle.

Reviews

There are no reviews yet.

Be the first to review “Motobilt Dana 44 Front Axle Truss for JK Rubicon”

Your email address will not be published. Required fields are marked *

Product facts

Specifications

Canonical product
MP-US-B0BSHBHBJN
Source product ID
B0BSHBHBJN
Category
Replacement Parts / Transmission & Drive Train / Axle / Shafts
Available images
7

Vehicle information

Available fitment details

Listing compatibility notes

  • You will see in some of the pictures that the truss fits very tight.

Fitment data is provided as a buying aid. Verify the listing against your vehicle and existing part before ordering.

Exact identity, part numbers, model references, and available compatibility evidence

Buying guidance

Quick decision

An identity-first shafts listing organized around stable product references and available compatibility evidence.

Fit and size notes

  • Match the complete identifier, side, position, connector, dimensions, and visible design with the existing part.
  • Treat uncertain vehicle notes as a buying aid, not as a confirmed fitment guarantee.

Specification notes

  • Canonical product: MP-US-B0BSHBHBJN
  • Source product ID: B0BSHBHBJN
  • Category: Replacement Parts / Transmission & Drive Train / Axle / Shafts
  • Available images: 7

Before you buy

  • Match the complete identifier, side, position, connector, dimensions, and visible design with the existing part.
  • Treat uncertain vehicle notes as a buying aid, not as a confirmed fitment guarantee.

Related products