Skip to content
Clear product details Fitment guidance Contact support
PartMatch Direct Match the identity before the order.
My account Cart 0
Motorcycle Flywheel Puller Set | 10PCS Universal ATV Motorcycle Repair Tool for Motorcycle Bikes, Honda, Suzuki, Bosch, Kawasaki, Ducati, Yamaha Flywheel

Motorcycle Flywheel Puller Set | 10PCS Universal ATV Motorcycle Repair Tool for Motorcycle Bikes, Honda, Suzuki, Bosch, Kawasaki, Ducati, Yamaha Flywheel

$23.59

48 ratingsSource: Amazon

Confirm quantity, package contents, selected variation, current offer details, and store terms before placing the order.

  • Complete Flywheel Puller Set: This motorcycle flywheel puller is a set of ATV and scooter repair tools used to separate the flywheel from the crankshaft taper and can even be used to pull clutch packs.
  • Built to Last: Each tool of motorcycle & dirt bike flywheel puller set is constructed from durable steel with a black oxide coating for maximum strength and longevity that resists rust and corrosion; Each flywheel remover part comes pre-oiled and is permanently laser-etched with metric sizing.
  • Wide Applications: For street, performance, and off-road small engines on scooters, motorcycles, ATVs, and dirt bikes. Our flywheel removal tool is compatible with Honda, Suzuki, Kawasaki, Yamaha, Ducati, Arctic Cat, Vespa, Bosch, and most late-model MX bikes.
  • Easy Storage: This motorcycle flywheel puller set comes in a convenient carrying case with bult-in handle and slide latches that makes transportation, storage and organization a breeze. Ideal for Yamaha warrior stator puller.
  • Packge Included: 1 pc: M14 x 1.5; 1 pc: M16 x 1.5; 1 pc: M18 x 1.5; 1 pc: M19 x 1.0; 1 pc: M20 x 1.0 & M27 x 1.25; 1 pc: M22 x 1.0 & M25 x 1.5; 1 pc: M22 x 1.5 & M26 x 1.5; 1 pc: M24 x 1.0 & M27 x 1.0 ;1 pc: M26 x 1.0 & M28 x 1.0; 1 pc: M28 x 1.5

Before you order
  • Confirm the part number, position, dimensions, and connector details shown on this page.
  • Compare the listing with the part currently installed on your vehicle.
SKU: D-B0BGLKXB2S Category:

Description

Product Description

More Details of Flywheel Pullers

  • Each compartment and each corresponding part of the flywheel puller set is permanently etched with metric sizing for simple identification.

  • Fine thread, extraordinary design, easy to use.

  • This flywheel puller comes with a convenient and hand carry case to make your engineering work more organized.

  • Our flywheel pullers are made from tough, premium, and are heat-treated for longevity and durability.

10PCS Universal

Motorcycle Repair Tools

  • This motorcycle flywheel puller is a set of ATV and scooter repair tools that come in a complete 10 pullers, 5 of which are double-ended for increased applications.
  • Separating your flywheel from the crankshaft taper has become easier with the use of this 10 flywheel puller set that comes in different sizes.

Specifications of Motorcycle Flywheel Puller Set

Material: Carbon Steel
5 single-ended pullers M14xP1.5, M16xP1.5, M18xP1.5, M19xP1.0, M28xP1.5
5 double-ended pullers: M20xP1.0 & M27xP1.25, M22xP1.0 & M25xP1.5, M22xP1.5 & M26xP1.5, M24xP1.0 & M27xP1.0L, M26xP1.0 & M28xP1.0
Package Weight: 1.87 kg / 4 pounds
Package Dimensions: 11 x 5 x 2 inches

More Choices

Brand

Acymner

Brand

Acymner

Brand

Acymner

Material

Carbon Steel

Material

Carbon Steel

Material

Carbon Steel

Number of Pieces

10

Number of Pieces

1

Number of Pieces

46

Weight

4 pounds/1.87 kg

Weight

‎1.74 pounds/0.8 kg

Weight

4.62 pounds/2.1 kg

Imported customer feedback

What customers reported

4.4 / 5 48 ratings

Source: Amazon. These reviews were imported from the source marketplace and are not reviews of purchases made on this website.

13 reviews for Motorcycle Flywheel Puller Set | 10PCS Universal ATV Motorcycle Repair Tool for Motorcycle Bikes, Honda, Suzuki, Bosch, Kawasaki, Ducati, Yamaha Flywheel

  1. Noah Stancil –

    Imported from Amazon. This is not a review of a purchase made on this website.

    External marketplace context: Verified Purchase

    Was missing labels on the three single sided pullers but works as it should

    Customer review image

  2. Michael Anthony Korn –

    Imported from Amazon. This is not a review of a purchase made on this website.

    External marketplace context: Verified Purchase

    The right type of tool the job called for, I started to take a short cut using a steering wheel puller, but figured out in time that it would’ve cost me more, because it would have warped or broke the magnetic hub balance. The project is a 2011 China built Moped, ignition system. I’m glad that I made the right choice obtaining the center type puller, it took me seconds pulling the magnetic hub off.

  3. Michael P –

    Imported from Amazon. This is not a review of a purchase made on this website.

    External marketplace context: Verified Purchase

    It did what it was saposta do and didn’t cost an arm and a leg. 10 out of 10 would recommend.

  4. zozapan –

    Imported from Amazon. This is not a review of a purchase made on this website.

    External marketplace context: Verified Purchase

    Some of the threads were a little damaged but might not matter. For about $30 CAD, it’s to be expected. Grease the threads. Hit the forcing screw with a soft faced hammer once tight and then gradually tighten. Keep doing this repeatedly and it should work fine.

  5. jose sanchez –

    Imported from Amazon. This is not a review of a purchase made on this website.

    External marketplace context: Verified Purchase

    ok

  6. Holyoake Performance –

    Imported from Amazon. This is not a review of a purchase made on this website.

    External marketplace context: Verified Purchase

    I am absolutely disappointed in this product. The bolt threads in the pullers are not centred And as such risk damaging the crankshaft or flywheel itself. Unfortunately, these are nothing more than scrap metal and a total waste of money. This will cost me a week on an engine rebuild while I source a better product. Will be contacting Amazon for a refund.

    Customer review image

  7. James H –

    Imported from Amazon. This is not a review of a purchase made on this website.

    External marketplace context: Verified Purchase

    Good tool/ good value.

  8. Marty smith –

    Imported from Amazon. This is not a review of a purchase made on this website.

    External marketplace context: Verified Purchase

    Love it

  9. John –

    Imported from Amazon. This is not a review of a purchase made on this website.

    External marketplace context: Verified Purchase

    Products was delivered today with only 3 of the 10 pieces in the case

  10. Jason –

    Imported from Amazon. This is not a review of a purchase made on this website.

    External marketplace context: Verified Purchase

    Worked as intended

  11. Customer –

    Imported from Amazon. This is not a review of a purchase made on this website.

    External marketplace context: Verified Purchase

    Quick delivery.

  12. Corey Prysko –

    Imported from Amazon. This is not a review of a purchase made on this website.

    External marketplace context: Verified Purchase

    Nice kit works great

  13. Mechanic from Milton –

    Imported from Amazon. This is not a review of a purchase made on this website.

    External marketplace context: Verified Purchase

    I used it on 80’s Honda scooter, but checked with other motorcycles that I own and it seems to have puller for them in the set. It looks well made and excellent value for money.

Add a review

Your email address will not be published. Required fields are marked *

Product facts

Specifications

Canonical product
MP-US-B0BGLKXB2S
Source product ID
B0BGLKXB2S
Category
Tools & Equipment / Engine Tools / Flywheel Tools
Available images
6

Vehicle information

Available fitment details

Listing compatibility notes

  • Our flywheel removal tool is compatible with Honda, Suzuki, Kawasaki, Yamaha, Ducati, Arctic Cat, Vespa, Bosch, and most late-model MX bikes.

Fitment data is provided as a buying aid. Verify the listing against your vehicle and existing part before ordering.

Exact identity, part numbers, model references, and available compatibility evidence

Buying guidance

Quick decision

An identity-first flywheel tools listing organized around stable product references and available compatibility evidence.

Fit and size notes

  • Match the complete identifier, side, position, connector, dimensions, and visible design with the existing part.
  • Treat uncertain vehicle notes as a buying aid, not as a confirmed fitment guarantee.

Specification notes

  • Canonical product: MP-US-B0BGLKXB2S
  • Source product ID: B0BGLKXB2S
  • Category: Tools & Equipment / Engine Tools / Flywheel Tools
  • Available images: 6

Before you buy

  • Match the complete identifier, side, position, connector, dimensions, and visible design with the existing part.
  • Treat uncertain vehicle notes as a buying aid, not as a confirmed fitment guarantee.

Related products