Skip to content
Clear product details Fitment guidance Contact support
PartMatch Direct Match the identity before the order.

3 Levels Adjustable RV Boat Table Pedestal, Detachable Aluminum Alloy RV Table Legs Stand Base Telescoping Mount Frame 17-29 Inch Height Range for RV Marine Boat Marine Yacht

$134.00

40 ratingsSource: Amazon

Confirm quantity, package contents, selected variation, current offer details, and store terms before placing the order.

About this item

  • 【3 Adjustable Height】The HWHongRV adjusts any vertically on the bracket(17-29 inches). Turn the knob on to adjust the height or turn it, and turn the knob off to lock to set the height where you want it.
  • 【Bold Pipe Diameter】The rv dinette table legs diameters are 8.5 cm/3.3 inch; 7.25 cm/2.8 inch; 6 cm/2.4 inch. Thicker diameter makes the rv table legs have excellent stability and load-bearing capacity, and the load-bearing capacity can reach 100 lbs.
  • 【Detachable Desktop】If the table needs to be removed, simply press the top black button to remove the top base. Instead of removing the entire table bracket. Quick, convenient, and perfect for those on-the-go.
  • 【High Quality】Made of high-quality aluminum alloy + ABS, oxidized on the surface, corrosion‑resistant and oxidation‑resistant, lightweight and durable. Ideal in workrooms, galley or pilot house, crewman can adjust table heights easily.
  • 【Application】Eliminate your wobbly table with HWHongRV table leg to improve your existing sea yachts, marine boat, truck camper, travel trailer, teardrop, motorhome etc!

Before you order
  • Confirm the part number, position, dimensions, and connector details shown on this page.
  • Compare the listing with the part currently installed on your vehicle.
SKU: D-B09QLRMG9T Category:

Description

Product Description

3 Adjustable Height, maximum 28.7 inches, minimum 16.9 inches. You can get the height right where you want it.

For easy transportation, the black handle is glued to the pole, and it can be screwed in after receiving the goods

The thicker diameter makes the table legs have excellent stability and load-bearing capacity, and the load-bearing capacity can reach 100 lbs.

Material: Aluminum Alloy

Base Diameter: 177mm/7.0in

Desktop Board Diameter: 174mm/6.9in

Rod Diameter:60mm/2.4in, 72mm/2.8in, 85mm/3.3in

Instructions for use

• Raise: Unscrew the knob on the table pole, hold the lower tube with one hand, and pull the upper tube with the other hand, then tighten the knob after raising it.

• Lowering: Hold the upper tube with one hand, unscrew the knob on the table pole with the other hand, slowly lower the upper tube, lower the height, and then tighten the knob.

Imported customer feedback

What customers reported

4.5 / 5 40 ratings

Source: Amazon. These reviews were imported from the source marketplace and are not reviews of purchases made on this website.

13 reviews for 3 Levels Adjustable RV Boat Table Pedestal, Detachable Aluminum Alloy RV Table Legs Stand Base Telescoping Mount Frame 17-29 Inch Height Range for RV Marine Boat Marine Yacht

  1. Wootieli

    Imported from Amazon. This is not a review of a purchase made on this website.

    External marketplace context: Amazon Vine Customer Review of Free Product( What's this? )

    Ok, this is much wider than I expected but that’s not a bad thing. It’s made of what feels and looks like aluminum maybe? The image shows a shiny metal but mine is textured which I like. The knobs are very large and easy to manipulate. I had one big issue with mine and nearly tore it up trying to fix it. When it arrived, it was apparent it had suffered a blow to the top tube during shipping with no padding. The top tube had been jammed into the bottom tube and would not telescope nor move at all. I tried nearly everything except winching it with my Jeep! See my seller review for that story! Finally I used a ratchet strap. I also had to bang the bottom tube several times against a padded concrete block. After all my attempts it finally gave up the fight and telescoped. It was hard at first but it seems to work fine now. It came with some large wood screws but I don’t know whether to trust these to hold this bad boy in place. Might have to use some thin bolts through the floor. But will try the screws first. I just got a job working remote and I’m a full timer in my RV so the table I’m making will serve as a desk. The bottom mount is thin enough I believe my slide floor will go right over this and not hit as long as I keep it off a roller. I haven’t made my table top yet but will this week and try to post a completed pic. This mount is beefy and it looks good too. Other than the issue with the stuck tube, I’m very satisfied with this pedestal. But for this price, it should maybe Bluetooth or something!😂

    Customer review imageCustomer review imageCustomer review imageCustomer review imageCustomer review image
  2. Hector

    Imported from Amazon. This is not a review of a purchase made on this website.

    External marketplace context: Verified Purchase

    This was my third attempt at making the dinette table more sturdy and less wobbly and it worked. My only mistake is I left it a quarter of an inch away from the wall so you can twist it just a hair so I’m gonna put like something to block. It doesn’t twist but works up and down. You will have to take the handles off completely takeoff the threaded bolt off the knob put Loctite on it and then re-thread the knob onto the bolt, because if not, it will come loose.

    Customer review image
  3. S. Vance

    Imported from Amazon. This is not a review of a purchase made on this website.

    External marketplace context: Verified Purchase

    The pedestal is very sturdy, is a good value for the money, and works perfectly in my RV. Totally solved the issue of converting my table into a base for our grandson’s bed with minimal effort. The manufacturer is very responsive to inquiries and I highly recommend them.

  4. Mo

    Imported from Amazon. This is not a review of a purchase made on this website.

    External marketplace context: Verified Purchase

    The item is solid and well made. Exactly what it says. Adjusts up and down easily and feels sturdy. My only complaint would be that the tightening knobs can’t be adjusted to different rotated positions. Once tightened they are in the same position each time. My trailer is small and this adjustment would enable me to more easily access a storage area. This is unique to my configuration and may not be an issue for most folks.

  5. Mihaela

    Imported from Amazon. This is not a review of a purchase made on this website.

    External marketplace context: Verified Purchase

    Me gusta

  6. Jacques H.

    Imported from Amazon. This is not a review of a purchase made on this website.

    External marketplace context: Verified Purchase

    Très bon produit

  7. NCosmany

    Imported from Amazon. This is not a review of a purchase made on this website.

    External marketplace context: Verified Purchase

    Well made but it did not fit our needs for our particular camper

  8. Danny

    Imported from Amazon. This is not a review of a purchase made on this website.

    External marketplace context: Verified Purchase

    Installé dans un vanlife. Très satisfait

  9. Douglas

    Imported from Amazon. This is not a review of a purchase made on this website.

    External marketplace context: Verified Purchase

    Seems to be very well made and solid with very very little movement. Very impressive and definitely with work for our purposes in the RV. I should have bought this first instead of the other brand that sold for $77.00. That was crap! I am very happy!

  10. Kenneth L. Muldrew

    Imported from Amazon. This is not a review of a purchase made on this website.

    External marketplace context: Verified Purchase

    This table pedestal is very strong and provides excellent support for my rather heavy wood/epoxy table. The only issue is that the switch at the base (used to lock it into place so as to prevent rotation) is weak so it has a problem with catching and holding. Otherwise 5 stars.

  11. Nombre

    Imported from Amazon. This is not a review of a purchase made on this website.

    External marketplace context: Verified Purchase

    La pata está muy bien.Era de segunda mano, pero casi nueva.La tuve que devolver, porque la tabla de la mesa era demasiado grande (120×80) para la pata.

  12. Javier

    Imported from Amazon. This is not a review of a purchase made on this website.

    External marketplace context: Verified Purchase

    Me enviaron por error el producto equivocado, de un poco menos calidad, y para no perder la ventaja de precio por los días Prime aceptaron enviarme el correcto sin cambios, y yo les envié el equivocado.Tengo que decir que, habiendo visto los dos, este, el de tres piezas es más robusto y permite más margen de alturas. El otro no está mal tampoco, teniendo en cuenta que es bastante más barato.Muy contento con la compra 👍🏽

  13. patrick mclaughlin

    Imported from Amazon. This is not a review of a purchase made on this website.

    External marketplace context: Verified Purchase

    This pedestal is the best!!! Tried the other types, less money etc. but this is built like a tank and barely wobbles. We tried four other brands and they were all terrible.If you want a strong stable pedestal….this is the best bang for the buck!

    Customer review image
Add a review

Your email address will not be published. Required fields are marked *

Product facts

Specifications

Canonical product
MP-US-B09QLRMG9T
Source product ID
B09QLRMG9T
Category
Rv Parts & Accessories / Interior / Furniture Parts & Hardware
Available images
8

No structured vehicle fitment data is available. Compare the listing with the vehicle and existing part before ordering.

Exact identity, part numbers, model references, and available compatibility evidence

Buying guidance

Quick decision

An identity-first furniture parts & hardware listing organized around stable product references and available compatibility evidence.

Fit and size notes

  • Match the complete identifier, side, position, connector, dimensions, and visible design with the existing part.
  • Treat uncertain vehicle notes as a buying aid, not as a confirmed fitment guarantee.

Specification notes

  • Canonical product: MP-US-B09QLRMG9T
  • Source product ID: B09QLRMG9T
  • Category: Rv Parts & Accessories / Interior / Furniture Parts & Hardware
  • Available images: 8

Before you buy

  • Match the complete identifier, side, position, connector, dimensions, and visible design with the existing part.
  • Treat uncertain vehicle notes as a buying aid, not as a confirmed fitment guarantee.